Any ideas??? Help
TIA
Michael
----- Original Message -----
From: Mark Radabaugh <Mark@amplex.net>
To: 'Michael R. Anderson' <manderson@pdqlink.com>
Sent: Thursday, May 06, 1999 9:51 PM
Subject: RE: (PM) Upgrading to 3.8.2c2
> Reboot!
>
> Mark Radabaugh Amplex (419)833-3635
> mark@amplex.net
>
> > -----Original Message-----
> > From: owner-portmaster-users@livingston.com
> > [mailto:owner-portmaster-users@livingston.com]On Behalf Of Michael R.
> > Anderson
> > Sent: Thursday, May 06, 1999 10:28 PM
> > To: portmaster-users@livingston.com
> > Subject: Re: (PM) Upgrading to 3.8.2c2
> >
> >
> > I just upgraded one PM3 from 3.8 to 3.8.2c... After finally
> > getting the
> > download, the PM3 upgraded fine, but in PMVision 1.3, when
> > logged in, it
> > still says version 3.8
> >
> > I guess I'm still wondering if I should reboot after such an
> > upgrade? Other
> > than that everything seems to be working fine.
> >
> >
> > -----Original Message-----
> > From: I don't work for Lucent RABU <livingston@iav.com>
> > To: portmaster-users@livingston.com <portmaster-users@livingston.com>
> > Date: Thursday, May 06, 1999 8:47 PM
> > Subject: Re: (PM) Upgrading to 3.8.2c2
> >
> >
> > >On Wed, 5 May 1999, Eric Calvert wrote:
> > >
> > >> and a half hours later, the telco gets back to me and says
> > >> "Have you powered off your equipment?" I say "No" (feeling
> > >> stupid while I'm saying it). He says "Try that." I did. It
> > >> worked.
> > >>
> > >> Who knew I should have called GTE for tech support on my
> > >> Lucent equipment????
> > >>
> > >> The moral of the story...
> > >>
> > >> If your PM-3 won't answer calls after an upgrade, try power
> > >> cycling it. A reboot may not be enough.
> > >
> > >That's my standard procedure since 3.5 or 3.7 ... A reboot
> > seems to hang
> > >things since memory isn't cleared properly (a guess).
> > >
> > >After any upgrade on a PM a power cycle is done here.
> > >
> > >8)
> > >
> > >
> > >--
> > >Aloha from Paradise,
> > >
> > >Sherwood
> > >Got Clue? If so: ISPF! The Forum for ISPs by ISPs,
> <http://www.ispf.com>
> >
> >-
> >To unsubscribe, email 'majordomo@livingston.com' with
> >'unsubscribe portmaster-users' in the body of the message.
> >Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
> >
>
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-users' in the body of the message.
> Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
>
>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>