Re: (PM) Ask for a callback

Thomas Kinnen (tkinnen@livingston.com)
Thu, 06 May 1999 14:11:45 -0700

> I have one guy who has callback on oldie PM2.
> He phones into it and verifies via RADIUS. Then one of
> the modems calls him back. I did it using location parameter.
> Is it possible to do it dynamically ?
> Sometimes that modem which phones this client is busy and he doesn't get
> back singal to him.

I would place more modems in the port group that is used to call him back.
That way if there is a free modem it will be used. WHat I did in the past was
put all modems in one group if they were not used for dedicated customers.
Each dedicated customer had modems that were not part of the hunt group and
only had their modems in their group.

-- 
Thomas C Kinnen - <tkinnen@ra.lucent.com> <tkinnen@sobhrach.com>
[RADIUS Test Engineer] - LUCENT Technologies RABU
"All of the opinions stated above are my own and not my employer's,
unless they were given to me by my employer"
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>