Thomas Kinnen is correct, However 3.9b8 doesn't have the latest modem code,
it has the same modem code as 3.8.2, so if you haven't had modem issues
with ComOS 3.8.2 then I'd go to 3.9b8 to take advantage of NAT, NFAS, VPN
or L2TP.
Hope this helps,
Terry
At 11:14 AM 5/6/99 -0700, Thomas Kinnen wrote:
>"Jason A. Cox" wrote:
>
>> Is there a way to do network address translation on the PM3 so that I can
>> save my IP's (ex. 10.1.1.0/24 becomes 38.123.123.123)? I understand that I
>> can buy NAT for my Cisco 2610 to do the translation, but I was wondering if
>> the PM3 has or will have the ability to do NAT itself. Thanks!
>
>
>ComOS 3.9 is in open beta and Supports NAT
>
>---
>Thomas C Kinnen - <tkinnen@ra.lucent.com> <tkinnen@sobhrach.com>
>[RADIUS Test Engineer] - LUCENT Technologies RABU
>"All of the opinions stated above are my own and not my employer's,
>unless they were given to me by my employer"
>-
>To unsubscribe, email 'majordomo@livingston.com' with
>'unsubscribe portmaster-users' in the body of the message.
>Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
>
>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>