Then turn on RIP II recieve on Novell MPR3.
Then the second line should come up OK.
Strange problem. . . I fought with this for months.
I have a feeling OSPF would work, but I never got that
far.
At 09:29 AM 5/5/99 -0700, you wrote:
>Scott Black wrote:
>
>> Is there anything special I have to enable to allow this to work? They are
>> authenticated with a single static IP and are running NAT on their end.
One
>> modem connection routes perfectly. When they bring up the other
connection,
>> it shows the same IP (correct) but the conection seems to die. Ping from
>> the PM3 reports that the IP is "alive" but I cannot ping from anywhere else
>> on the network.
>
>Search the archives as someone else had this same problem and I believe it
>was an issue with using RFC MLPPP vs. a property MLPPP on the Novel side.
>
>--
>Thomas C Kinnen - <tkinnen@ra.lucent.com> <tkinnen@sobhrach.com>
>[RADIUS Test Engineer] - LUCENT Technologies RABU
>"All of the opinions stated above are my own and not my employer's,
>unless they were given to me by my employer"
>-
>To unsubscribe, email 'majordomo@livingston.com' with
>'unsubscribe portmaster-users' in the body of the message.
>Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
>
>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>