> >There is a hard coded limit of 4 telnet connections to a PM. Why would you
> >need more then 4 constant telnet session to a box?
> I have MRTG scripts which use pmcommand to get into PM every 5 minutes to get some infos.
PMCommand does not use Telnet. It uses the PMConsole Port.
> Now I've changed it to SNMP progz but when this old progs where using it sometimes (when
> for example my connection to this 19" mod-tap box broke down and active sessions are still
> on PM) it's impossible to get into it and change sth.
> Maybe there is something to remove dead connections before the time when they should be
> removed by system ?
> It would help me a lot.
Take look in the tech note section of www.livingston.com. You can reset
hung network connections using a reset N### command.
-- Thomas C Kinnen - <tkinnen@livingston.com> <tkinnen@sobhrach.com> [RADIUS Test Engineer] - LUCENT Technologies RABU "All of the opinions stated above are my own and not my employer's, unless they were given to me by my employer" - To unsubscribe, email 'majordomo@livingston.com' with 'unsubscribe portmaster-users' in the body of the message. Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>