First off the cable is wrong. You need a 9 to 25 pin NULL MODEM CABLE
JOhn :}
At 01:19 PM 5/5/99 -0400, you wrote:
>Just like the doc's tell me to I have attached a 25 pin M-to-M modem
>cable (the same one we use between our modems and our other PM2's)
>with the 25-to-9 pin adapter to COM1 of my computer.
>
>Dip switch 1 on the router is up, all others are down and I have my terminal
>prog set to 9600-N-8-1 as per the manual.
>
>When I start the terminal program & connect absolutely nothing
>happens, the prog tells me that it is connected however nothing appears
>on the screen.
>
>I know some hardware requires that I send it a [space] or [cr] however
>this does not work.
>
>Any suggestions for a newbie as to what I'm missing?
>
>MDM
>
>
>-
>To unsubscribe, email 'majordomo@livingston.com' with
>'unsubscribe portmaster-users' in the body of the message.
>Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
John C. Lange, Sr. PALACE dot NET, INC.
microjl@palacenet.net MICRO-TECH Computers, Inc.
608.742.1601 & 6980 1819 New Pinery Road
http://www.palacenet.net/ Portage, WI 53901
MSCE Training for only $150.00 - http://dpec.palacenet.net/
Authorized iPSwitch WebVar @ http://www.microt.com/iPSwitch/
--- __o
--- _-\<,_ Fastest Service in Town
--- (_)/ (_)
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>