(PM) MPPP and Novell

Scott Black (admin@emporium.on.ca)
Wed, 5 May 1999 11:03:50 -0400

I have a customer trying to Multilink 2 analog modems connected to a PM3 at
our end. They are using Novell 5 and BorderManager. The PM3 is running
COMOS 3.8

Is there anything special I have to enable to allow this to work? They are
authenticated with a single static IP and are running NAT on their end. One
modem connection routes perfectly. When they bring up the other connection,
it shows the same IP (correct) but the conection seems to die. Ping from
the PM3 reports that the IP is "alive" but I cannot ping from anywhere else
on the network.

Is this likely a PM3 issue or a Novell issue?

Thanks!

Scott

-----------------------------------------------------------
"We demand rigidly defined areas of doubt and uncertainty."
- Douglas Adams

-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>