RE: (PM) AT Commands for Error Correction and Compression

Vincent Aniello (aniello@netmoves.com)
Wed, 5 May 1999 10:54:45 -0400

I need to connect from a PM3 do a vendors modem bank using AT commands. The
vendor's documentation states that compression and error correct should be
turned off.

--Vincent

-----Original Message-----
From: I don't work for Lucent RABU [mailto:livingston@iav.com]
Sent: Wednesday, May 05, 1999 1:29 AM
To: Vincent Aniello
Cc: portmaster-users@livingston.com
Subject: Re: (PM) AT Commands for Error Correction and Compression

On Tue, 4 May 1999, Vincent Aniello wrote:

> What are the AT commands to turn off error correction and compression on
the
> modems in the PortMaster3?

1) there are no AT commands, as specified before, except those listed at:
http://www.livingston.com/tech/docs/command/async.html

2) dialout is NOT v.90 or K56Flex, it's v.34

http://www.livingston.com/tech/docs/release/release38.html

"V.90 is not supported for dial-out. The maximum analog dial-out
speed is 33600bps for V.34, K56flex, and V.90."

which begs a question of why do you need to turn these off when dialing
out?

--
Aloha from Paradise,


Sherwood
Got Clue? If so: ISPF! The Forum for ISPs by ISPs, <http://www.ispf.com>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>