at&n0dt<phone number> will work for dialing out...
but compression even i do not know....
With Warm Regards
Shibu R
Senior Network Analyst
________________________________________________
Mailto : Shibu.Nair@med.ge.com
shibur@wipsys.soft.net
Tel : (414) 524 5261
Fax : (414) 896 2790
GE Medical Systems,
USA.
----------
From: Vincent Aniello[SMTP:aniello@netmoves.com]
Reply To: Vincent Aniello
Sent: Wednesday, May 05, 1999 9:23 AM
To: Nair, Shibu (MED, Wipro Systems, Inc);
'portmaster-users-digest@livingston.com'
Subject: RE: (PM) AT Commands for Error Correction and
Compression
I don't need the AT commands for a dial out location. I need
them for
attaching to a modem port and dialing out using AT commands.
--Vincent
-----Original Message-----
From: Nair, Shibu (MED, Wipro Systems, Inc)
[mailto:Shibu.Nair@amermsx.med.ge.com]
Sent: Wednesday, May 05, 1999 10:22 AM
To: 'portmaster-users-digest@livingston.com'; 'Vincent Aniello'
Subject: RE: (PM) AT Commands for Error Correction and
Compression
Hi
I was told by Livingstone, that we can not use ATDT scripts
(ATDT,Connect,etc)
on PM3 location table....
We can use only V25bis script instead of.....
I tested the same on PM3 and it is working (but there is not
ATDT
commands)...
With Warm Regards
Shibu R
Senior Network Analyst
________________________________________________
Mailto : Shibu.Nair@med.ge.com
shibur@wipsys.soft.net
Tel : (414) 524 5261
Fax : (414) 896 2790
GE Medical Systems,
USA.
----------
From: Vincent Aniello[SMTP:aniello@netmoves.com]
Reply To: Vincent Aniello
Sent: Tuesday, May 04, 1999 5:36 PM
To: 'portmaster-users-digest@livingston.com'
Subject: (PM) AT Commands for Error Correction
and
Compression
What are the AT commands to turn off error correction
and
compression on the
modems in the PortMaster3?
Any help would be appreciated.
Thanks.
--Vincent
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the
message.
Searchable list archive:
<URL:http://www.livingston.com/Tech/archive/>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive:
<URL:http://www.livingston.com/Tech/archive/>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>