I was told by Livingstone, that we can not use ATDT scripts
(ATDT,Connect,etc)
on PM3 location table....
We can use only V25bis script instead of.....
I tested the same on PM3 and it is working (but there is not ATDT
commands)...
With Warm Regards
Shibu R
Senior Network Analyst
________________________________________________
Mailto : Shibu.Nair@med.ge.com
shibur@wipsys.soft.net
Tel : (414) 524 5261
Fax : (414) 896 2790
GE Medical Systems,
USA.
----------
From: Vincent Aniello[SMTP:aniello@netmoves.com]
Reply To: Vincent Aniello
Sent: Tuesday, May 04, 1999 5:36 PM
To: 'portmaster-users-digest@livingston.com'
Subject: (PM) AT Commands for Error Correction and
Compression
What are the AT commands to turn off error correction and
compression on the
modems in the PortMaster3?
Any help would be appreciated.
Thanks.
--Vincent
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive:
<URL:http://www.livingston.com/Tech/archive/>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>