NO the default gateway should be the ethernet port on the PM3.
I have not been following this thread is the OR connecting and not routing??
>
>
>I'm completely open to paying a consulting fee via phone to troubleshoot
>and make this work as I can *not* afford to lose this customer.
>
>Really looking for anyone's feedback.
>
>
>Rather than have you ask for other info, I went ahead and included
>everything I thought was relevant below:
>
>
>Thanks!
>-Boze
>
>A PPP Debug:
>
> PPP Debug:
>
>
>1ide-gw> set debug 0x51Setting debug value to 0x5
>1ide-gw> Received IPCP_CONFIGURE_REQUEST on port S1 of 12 bytes containing
>01 DB 00 10 02 06 00 2D 0F 00 03 06 CF A6 D7 14
> Packet Info: Code: 0x01, ID: 0xDB, 16 bytes.
> IP-Compression-Protocol [0x02], length: (6 bytes), Van Jacobson
>Compressed TCP/IP [0x002D0F00]
> IP-Address [0x03], length: (6 bytes), [207.166.215.20]
>Sending IPCP_CONFIGURE_NAK to port S1 of 10 bytes containing:
>03 DB 00 0A 03 06 CF A6 D7 5B Packet Info: Code: 0x03, ID: 0xDB, 10 bytes.
> IP-Address [0x03], length: (6 bytes), [207.166.215.91]
>Received IPCP_CONFIGURE_REQUEST on port S1 of 12 bytes containing:
>01 DC 00 10 02 06 00 2D 0F 00 03 06 CF A6 D7 14
> Packet Info: Code: 0x01, ID: 0xDC, 16 bytes.
> IP-Compression-Protocol [0x02], length: (6 bytes), Van Jacobson
>Compressed TCP/IP [0x002D0F00]
> IP-Address [0x03], length: (6 bytes), [207.166.215.20]
>Sending IPCP_CONFIGURE_NAK to port S1 of 10 bytes containing:
>03 DC 00 0A 03 06 CF A6 D7 5B Packet Info: Code: 0x03, ID: 0xDC, 10 bytes.
> IP-Address [0x03], length: (6 bytes), [207.166.215.91]
>
>
>What I have been doing to initiate this:
>
>1ide-gw> sho set console
>Setting CONSOLE to admin session
>1ide-gw> set debugn isdn
>Enabling ISDN debugging
>1ide-gw> dial speedynet -x
>Starting dial to location speedynet using S1
>1ide-gw> sendthem (CRN5721008)
>isdn_dial; S1 CRN5721008
>isdn_dodial S1 (0:1) Sending Call Request - 5721008
>expect (=DCD=)
>d0: Received Call Proceeding
>07 00 01 80
>S1 (0:1) CONNECT_ACK - B1
>=DCD=got it
>Chat Succeeded - Starting PPP
>Connection Failed
>
>My global settings on the ORU:
>
>1ide-gw> show glo
> System Name: 1ide-gw
> Default Host: 0.0.0.0
> Alternate Hosts:
> IP Gateway: 207.166.215.1
> Gateway Metric: 1
> Default Routing: Quiet (Off)
> Name Service: DNS
> Name Server: 207.166.215.30, 207.166.215.36
> Domain: speedynet.net
>Telnet Access Port: 23
> Loghost: 0.0.0.0
> Maximum PMconsole: 1
> Assigned Address: 0.0.0.0
> RADIUS Server: 0.0.0.0
> Alternate Server: 0.0.0.0
> Accounting Server: 0.0.0.0
> Alt. Acct. Server: 0.0.0.0
>PPP Authentication: PAP: on CHAP: off
> ISDN Switch Type: NI-1
> ISDN MSN: off
> ISDN numberplan: unknown
> ISDN numbertype: unknown
> Disabled Modules: SNMP IPX OSPF BGP
>
>
>A sho all gives me:
>
>1ide-gw> show all
>Local Addr: 192.168.1.1 Default Host: 0.0.0.0
> Gateway: 207.166.215.1 Netmask: 255.255.255.0
>DNS Server: 207.166.215.30 Domain: speedynet.net
>
>Port Speed Mdm Host Type Status Input Output
>Pend
>---- ----- --- ---------------- ------ ------------- ---------- ----------
>----
>S0 9600 on Login/ USERNAME 0 11
> 0
>S1 64000 on Login/ IDLE 256759 180145
> 0
>S2 64000 on Login/ IDLE 0 0
> 0
>
>
>
>1ide-gw> show s0 0
>----------------------- Current Status - Port S0 ---------------------------
> Status: USERNAME
> Input: 0 Parity Errors: 0
> Output: 11 Framing Errors: 0
> Pending: 0 Overrun Errors: 0
> Modem Status: DCD+ CTS+
>
> Active Configuration Default Configuration (* = Host
> -------------------- --------------------- Can Override)
> Port Type: Login/Netwrk Login/Netwrk (Dial In & Out)
>(Security)
> Login Service: PortMaster PortMaster
> Baud Rates: 9600 9600,9600,9600
> Databits: 8 8
> Stopbits: 1 1
> Parity: none none
> Flow Control: RTS/CTS RTS/CTS
> Modem Control: on on
> Hosts: default
>
> Terminal Type:
> Login Prompt: $hostname login:
> Dial Group: 0
>1ide-gw>
>
>
>1ide-gw> sho s1
>--------------------- Current Status - ISDN Port S1 ------------------------
> Status: IDLE
> Input: 129899 Abort Errors: 0
> Output: 91067 CRC Errors: 0
> Pending: 0 Overrun Errors: 0
> TX Errors: 0 Frame Errors: 0
> Modem Status: DCD- CTS+ TELCO+ NT1+ Disconnect:
>
> Active Configuration Default Configuration (* = Host
> -------------------- --------------------- Can Override)
> Port Type: Login/Netwrk Login/Netwrk (Dial In & Out)
>(Security)
> Login Service: PortMaster PortMaster
> Line Speed: 64000 64000
> Hosts: default
>
> Terminal Type:
> Login Prompt: $hostname login:
> Dial Group: 18
> SPID: 33094594860101
> Directory No: 3309459486
>1ide-gw>
>1ide-gw>
>1ide-gw>
>1ide-gw> sho s2
>--------------------- Current Status - ISDN Port S2 ------------------------
> Status: IDLE
> Input: 0 Abort Errors: 0
> Output: 0 CRC Errors: 0
> Pending: 0 Overrun Errors: 0
> TX Errors: 0 Frame Errors: 0
> Modem Status: DCD- CTS+ TELCO+ NT1+ Disconnect:
>
> Active Configuration Default Configuration (* = Host
> -------------------- --------------------- Can Override)
> Port Type: Login/Netwrk Login/Netwrk (Dial In & Out)
>(Security)
> Login Service: PortMaster PortMaster
> Line Speed: 64000 64000
> Hosts: default
>
> Terminal Type:
> Login Prompt: $hostname login:
> Dial Group: 18
> SPID: 33094594870101
> Directory No: 3309459487
>
>
>
>CompuWeb, Inc. "Home of SpeedyNet Internet Services!"
>330.877.8892 888-8-SPDYNET info@speedynet.net
>Web Design/Hosting * Internet Access * Dedicated Access
>and REALLY friendly people concerned you get the best service possible.
>-
>To unsubscribe, email 'majordomo@livingston.com' with
>'unsubscribe portmaster-users' in the body of the message.
>Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>