> Doea PM3 or PM4 support Secure ID support ....?
That is a RADIUS feature. And yes it is supported.
> Also Does "Reported IP address" supported on PM3/PM4?
> Can some one explain about this support ...
Yes, (The on line manuals are your friend <G>)
http://www.livingston.com/tech/docs/command/global.html#26573
set reported_ip
This command reports an IP address different from the Ether0 address used
during PPP negotiation and Serial Line Internet Protocol (SLIP) startup.
set reported_ip Ipaddress
Usage
The IP address of any PortMaster device can be used with this command. This
feature is valuable for sites that require a number of PortMaster devices to
appear as a single IP address to other networks. With PPP, this information
is placed in the startup message, and the PortMaster devices report this
address to other networks. With SLIP, this information is placed in the
startup message.
Setting Ipaddress to 0.0.0.0 cancels the setting.
Example
Command> set reported_ip 172.16.200.1
Reported IP address changed from 0.0.0.0 to 172.16.200.1
-- Thomas C Kinnen - <tkinnen@ra.lucent.com> <tkinnen@sobhrach.com> [RADIUS Test Engineer] - LUCENT Technologies RABU "All of the opinions stated above are my own and not my employer's, unless they were given to me by my employer" - To unsubscribe, email 'majordomo@livingston.com' with 'unsubscribe portmaster-users' in the body of the message. Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>