I'm not sure what happens but it seems my email doesn't make the list... it
probably fails on the annoyance factor ;)
Anyway, I've made some headway this weekend with this ORU dialing into our
PM3. But it's still not able to complete/maintain its connection.
I've been through the Configuration guide and I understand it for the most
part with a bit of fuzziness. So I logged my telnet session and also
grabbed some PPP debug from the PPP Decoder ring.
I've attached all of this info at the base of this message. If someone
could offer some suggestions I'd be most appreciative. If you do suggest
some steps to try, could you also indicate a quick description of what to
expect and why these steps should be followed so I can report back
intelligently (or to the bes tof my ability, which ever works out the best ;)
Thanks!
-Boze
Begin Paste:
sho all
Local Addr: 192.168.1.10 Default Host: 0.0.0.0
Gateway: 207.166.215.1 Netmask: 255.255.255.0
DNS Server: 207.166.215.30 Domain: speedynet.net
Port Speed Mdm Host Type Status Input Output
Pend
---- ----- --- ---------------- ------ ------------- ---------- ----------
----
S0 9600 on Login/ USERNAME 0 22
0
S1 64000 on Login/ IDLE 396269 564215
0
S2 64000 on Login/ IDLE 0 0
0
1ide-gw>
1ide-gw>
1ide-gw>
1ide-gw> sho global
System Name: 1ide-gw
Default Host: 0.0.0.0
Alternate Hosts:
IP Gateway: 207.166.215.1
Gateway Metric: 1
Default Routing: Quiet (Off)
Name Service: DNS
Name Server: 207.166.215.30, 207.166.215.36
Domain: speedynet.net
Telnet Access Port: 23
Loghost: 0.0.0.0
Maximum PMconsole: 1
Assigned Address: 0.0.0.0
RADIUS Server: 0.0.0.0
Alternate Server: 0.0.0.0
Accounting Server: 0.0.0.0
Alt. Acct. Server: 0.0.0.0
PPP Authentication: PAP: on CHAP: off
ISDN Switch Type: NI-1
ISDN MSN: off
ISDN numberplan: unknown
ISDN numbertype: unknown
Disabled Modules: SNMP IPX OSPF BGP
1ide-gw>
1ide-gw>
1ide-gw>
1ide-gw> sho loc orwiz_isp
Location: orwiz_isp Type: On Demand
Destination: 207.166.215.20 Netmask: 255.255.255.0
Protocol: PPP Options: Quiet, Compression, Multilink
Input Filter: orwiz.in Output Filter: orwiz.out
Group: 18 Max Ports: 2
Idle Timeout: 0 minutes High Mark: 0 bytes
Mtu: 1500 Async Map: 00000000
Username: 1edi Password: 1edi
Telephone: 5721008&5721008
1ide-gw>
1ide-gw>
1ide-gw>
1ide-gw> sho s1
--------------------- Current Status - ISDN Port S1 ------------------------
Status: IDLE
Input: 396269 Abort Errors: 0
Output: 564215 CRC Errors: 0
Pending: 0 Overrun Errors: 0
TX Errors: 0 Frame Errors: 0
Modem Status: DCD- CTS+ TELCO+ NT1+ Disconnect:
Active Configuration Default Configuration (* = Host
-------------------- --------------------- Can Override)
Port Type: Login/Netwrk Login/Netwrk (Dial In & Out)
(Security)
Login Service: PortMaster PortMaster
Line Speed: 64000 64000
Hosts: default
Terminal Type:
Login Prompt: $hostname login:
Dial Group: 18
SPID: 33094594860101
Directory No: 3309459486
1ide-gw>
1ide-gw>
1ide-gw>
1ide-gw> sho s2
--------------------- Current Status - ISDN Port S2 ------------------------
Status: IDLE
Input: 0 Abort Errors: 0
Output: 0 CRC Errors: 0
Pending: 0 Overrun Errors: 0
TX Errors: 0 Frame Errors: 0
Modem Status: DCD- CTS+ TELCO+ NT1+ Disconnect:
Active Configuration Default Configuration (* = Host
-------------------- --------------------- Can Override)
Port Type: Login/Netwrk Login/Netwrk (Dial In & Out)
(Security)
Login Service: PortMaster PortMaster
Line Speed: 64000 64000
Hosts: default
Terminal Type:
Login Prompt: $hostname login:
Dial Group: 18
SPID: 33094594870101
Directory No: 3309459487
1ide-gw>
1ide-gw>
1ide-gw>
1ide-gw>
1ide-gw> set debug console
Setting CONSOLE to admin session
1ide-gw> set debug 0x51
Setting debug value to 0x51
1ide-gw>
1ide-gw>
1ide-gw>
1ide-gw> dial orwiz_isp -x
Starting dial to location orwiz_isp using S1
1ide-gw> sendthem (CRN5721008)
expect (=DCD=)
=DCD=got it
Chat Succeeded - Starting PPP
sendthem (CRN5721008)
expect (=DCD=)
=DCD=got it
Chat Succeeded - Starting PPP
1ide-gw> reset s1
Resetting port S1
1ide-gw>
1ide-gw>
1ide-gw>
1ide-gw> set debug off
All debugging disabled
1ide-gw> set console off
1ide-gw>
1ide-gw> set console
Setting CONSOLE to admin session
1ide-gw> set debug 0x55
Setting debug value to 0x55
1ide-gw>
1ide-gw>
1ide-gw>
1ide-gw> dial orwiz_isp -x
Starting dial to location orwiz_isp using S1
1ide-gw> sendthem (CRN5721008)
expect (=DCD=)
=DCD=got it
Chat Succeeded - Starting PPP
1ide-gw> reset s1
Resetting port S1
1ide-gw> set debug off
All debugging disabled
1ide-gw> set conole off
Syntax error: usage: set port_name,all option value
1ide-gw> Flushing ptp4
1ide-gw>
1ide-gw> sho routes
Destination Mask Gateway Source Flag Met Interface
----------------- ---- -------------------- ------- ---- --- ---------
0.0.0.0 0 207.166.215.1 local NS 1 ptp4
207.166.215.0 24 207.166.215.20 local NL 1 ptp4
192.168.1.0 24 192.168.1.10 local NL 1 ether0
1ide-gw>
1ide-gw>
1ide-gw> set debug isdn on console
Setting CONSOLE to admin session
1ide-gw> set debug isdn on
Enabling ISDN debugging
1ide-gw>
1ide-gw>
1ide-gw>
1ide-gw> s dial orwiz_isp
Starting dial to location orwiz_isp using S2
1ide-gw> S1 (0:1) DISCONNECT Normal Clearing
S1 (0:1) CALL_CLEAR
isdn_dial; S2 CRN5721008
isdn_dodial S2 (0:2) Sending Call Request - 5721008
d0: Received Call Proceeding
07 00 02 80
S2 (0:2) CONNECT_ACK - B1
S2 (0:2) DISCONNECT Normal Clearing
S2 (0:2) CALL_CLEAR
isdn_dial; S1 CRN5721008
isdn_dodial S1 (0:1) Sending Call Request - 5721008
d0: Received Call Proceeding
07 00 01 80
S1 (0:1) CONNECT_ACK - B1
S1 (0:1) DISCONNECT Normal Clearing
S1 (0:1) CALL_CLEAR
1ide-gw> show all
Local Addr: 192.168.1.10 Default Host: 0.0.0.0
Gateway: 207.166.215.1 Netmask: 255.255.255.0
DNS Server: 207.166.215.30 Domain: speedynet.net
Port Speed Mdm Host Type Status Input Output
Pend
---- ----- --- ---------------- ------ ------------- ---------- ----------
----
S0 9600 on Login/ USERNAME 0 22
0
S1 64000 on Login/ IDLE 724187 1031111
0
S2 64000 on Login/ IDLE 45155 64297
0
1ide-gw>
1ide-gw>
1ide-gw> set debug isdn off
Disabling ISDN debugging
1ide-gw> reset console
Console RESET
1ide-gw>
1ide-gw>
1ide-gw>
1ide-gw> set console
Setting CONSOLE to admin session
1ide-gw> set de bug 0x51
Syntax error: usage: set port_name,all option value
1ide-gw> set debug 0x51
Setting debug value to 0x51
1ide-gw>
1ide-gw>
1ide-gw> dial orwiz_isp
Starting dial to location orwiz_isp using S1
1ide-gw> sendthem (CRN5721008)
expect (=DCD=)
=DCD=got it
Chat Succeeded - Starting PPP
Sending LCP_CONFIGURE_REQUEST to port S1 of 29 bytes containing:
01 01 00 1d 05 06 22 3f b7 14 07 02 08 02 11 04
06 1c 12 02 13 09 03 00 c0 05 03 42 40
Received LCP_CONFIGURE_REQUEST on port S1 of 25 bytes containing:
01 04 00 1d 05 06 26 0f 29 67 03 04 c0 23 11 04
06 1c 12 02 13 09 03 00 c0 05 04 03 32
Sending LCP_CONFIGURE_ACK to port S1 of 29 bytes containing:
02 04 00 1d 05 06 26 0f 29 67 03 04 c0 23 11 04
06 1c 12 02 13 09 03 00 c0 05 04 03 32
Received LCP_CONFIGURE_ACK on port S1 of 25 bytes containing:
02 01 00 1d 05 06 22 3f b7 14 07 02 08 02 11 04
06 1c 12 02 13 09 03 00 c0 05 03 42 40
S1: LCP Open
Sending PAP_AUTH_REQ to port S1 of 14 bytes containing:
01 01 00 0e 04 31 65 64 69 04 31 65 64 69
Received PAP_AUTH_ACK on port S1 of 20 bytes containing:
02 01 00 14 0f 4c 6f 67 69 6e 20 53 75 63 63 65
65 64 65 64
Sending CCP_CONFIGURE_REQUEST to port S1 of 9 bytes containing:
01 01 00 09 11 05 00 01 03
Received IPCP_CONFIGURE_REQUEST on port S1 of 12 bytes containing:
01 01 00 10 02 06 00 2d 0f 00 03 06 cf a6 d7 14
Sending IPCP_CONFIGURE_ACK to port S1 of 16 bytes containing:
02 01 00 10 02 06 00 2d 0f 00 03 06 cf a6 d7 14
>>>
Is this where the problem is kicking in? What does this mean? PPP Decoder
mentioned somethign about stac compression tho I don't recall enabling it.
<<<
Sending IPCP_CONFIGURE_REQUEST to port S1 of 16 bytes containing:
01 01 00 10 02 06 00 2d 0f 00 03 06 c0 a8 01 0a
Received LCP_PROTOCOL_REJECT on port S1 of 11 bytes containing:
08 05 00 0f 80 fd 01 01 00 09 11 05 00 01 03
Received IPCP_CONFIGURE_NAK on port S1 of 6 bytes containing:
03 01 00 0a 03 06 cf a6 d7 5b
Sending IPCP_CONFIGURE_REQUEST to port S1 of 16 bytes containing:
01 02 00 10 02 06 00 2d 0f 00 03 06 c0 a8 01 0a
Received IPCP_CONFIGURE_NAK on port S1 of 6 bytes containing:
03 02 00 0a 03 06 cf a6 d7 5b
Sending IPCP_CONFIGURE_REQUEST to port S1 of 16 bytes containing:
01 03 00 10 02 06 00 2d 0f 00 03 06 c0 a8 01 0a
Received IPCP_CONFIGURE_NAK on port S1 of 6 bytes containing:
03 03 00 0a 03 06 cf a6 d7 5b
Sending IPCP_CONFIGURE_REQUEST to port S1 of 16 bytes containing:
01 04 00 10 02 06 00 2d 0f 00 03 06 c0 a8 01 0a
Received IPCP_CONFIGURE_NAK on port S1 of 6 bytes containing:
03 04 00 0a 03 06 cf a6 d7 5b
Sending IPCP_CONFIGURE_REQUEST to port S1 of 16 bytes containing:
01 05 00 10 02 06 00 2d 0f 00 03 06 c0 a8 01 0a
Received IPCP_CONFIGURE_NAK on port S1 of 6 bytes containing:
03 05 00 0a 03 06 cf a6 d7 5b
Sending IPCP_CONFIGURE_REQUEST to port S1 of 16 bytes containing:
01 06 00 10 02 06 00 2d 0f 00 03 06 c0 a8 01 0a
Received IPCP_CONFIGURE_NAK on port S1 of 6 bytes containing:
03 06 00 0a 03 06 cf a6 d7 5b
Sending IPCP_CONFIGURE_REQUEST to port S1 of 16 bytes containing:
01 07 00 10 02 06 00 2d 0f 00 03 06 c0 a8 01 0a
Received IPCP_CONFIGURE_NAK on port S1 of 6 bytes containing:
03 07 00 0a 03 06 cf a6 d7 5b
Sending IPCP_CONFIGURE_REQUEST to port S1 of 16 bytes containing:
01 08 00 10 02 06 00 2d 0f 00 03 06 c0 a8 01 0a
<SNIP for redundancy>
Received IPCP_CONFIGURE_NAK on port S1 of 6 bytes containing:
03 77 00 0a 03 06 cf a6 d7 5b
Sending IPCP_CONFIGURE_REQUEST to port S1 of 16 bytes containing:
01 78 00 10 02 06 00 2d 0f 00 03 06 c0 a8 01 0a
Received IPCP_CONFIGURE_NAK on port S1 of 6 bytes containing:
03 78 00 0a 03 06 cf a6 d7 5b
Sending IPCP_CONFIGURE_REQUEST to port S1 of 16 bytes containing:
01 79 00 10 02 06 00 2d 0f 00 03 06 c0 a8 01 0a
1ide-gw> set debug 0
Setting debug value to 0x0
1ide-gw> set reset console
Console RESET
1ide-gw>
Any ideas? :/
-Boze
CompuWeb, Inc. "Home of SpeedyNet Internet Services!"
330.877.8892 888-8-SPDYNET info@speedynet.net
Web Design/Hosting * Internet Access * Dedicated Access
and REALLY friendly people concerned you get the best service possible.
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>