As requested I set teh following debug options... however, the:
set debug isdn-l1 d0
option gave an error:
The output I recevied from attempting to dial the specific location we're
working with:
Invalid parameter "isdn-l1 d0", please choose from:
message... hope I was doing this right.
as for the output, it is as follows:
pm1> dial SMB -x
Starting dial to location SMB using S40
sendthem (VRA8779194)
isdn_dial: S40: InfoLen=39, CallId=32809, Ces=16
1c 01 01 00 00 80 29 1a 00 18 0b 81 81 80 81 00 00 80 03 01 00 00 00 70 09
84 81
38 37 37 39 31 39 34 04 03 90 90 a2
S40: Sending Call Request - 8779194 (VOICE)
expect (=DCD=)
CCIF_Proc - PKG_BTYPE
CCIF_ProcPkg: stype = 11, dslid = 1
L3_Go: src=400, dslid=1, call_id=32809, event=340
L3_Go - new: event=80 cr_len=2 cr=0
L3_Go - default
NLCB=2d67d8, ignore_msg=0
pkt=2e20ec
CallRefLen=2
L2_Go: L2_PktIn=2e2d38, hdr=2c430c, proto=0, src=300 0 0 0
L2_Go(): DSL_Id=1, SAPI=0, CES=1, TEI=0, Event=240
D1: send 00 01 2c d4 08 02 00 4a 05 04 03 90 90 a2 18 03 a9 83 91 70 08 c1
38 37
37 39 31 39 34
D1: recv 00 01 01 2e
L2_Go: L2_PktIn=2e40c0, hdr=2e05bc, proto=0, src=200 0 1 1
L2_Go(): DSL_Id=1, SAPI=0, CES=1, TEI=0, Event=1
D1: recv 02 01 d4 2e 08 02 80 4a 02 18 03 a9 83 91
L2_Go: L2_PktIn=2e20ec, hdr=2e40c0, proto=0, src=200 2 1 d4
L2_Go(): DSL_Id=1, SAPI=0, CES=1, TEI=0, Event=0
D1: send 02 01 01 d6
D1: recv 02 01 d6 2e 08 02 80 4a 03 08 02 82 9f 1e 02 84 88
L3_Go: src=20a, dslid=1, call_id=0, event=241
L3_Go - new: event=2 cr_len=2 cr=4a
L3_Go - default
NLCB=2d67d8, ignore_msg=0
pkt=2e20ec
CallRefLen=2
L2_Go: L2_PktIn=2e05bc, hdr=2c2c64, proto=0, src=200 2 1 d6
L2_Go(): DSL_Id=1, SAPI=0, CES=1, TEI=0, Event=0
D1: send 02 01 01 d8
CCIF_Proc - PRIM_BTYPE
CCIF_ProcPrim: Dsl_ID=1 Prim_ID=341
L3_Go: src=20a, dslid=1, call_id=0, event=241
L3_Go - new: event=3 cr_len=2 cr=4a
L3_Go - default
NLCB=2d67d8, ignore_msg=0
pkt=2e05bc
CallRefLen=2
host_proc: from=400, to=1:1, type=3, len=27
S40: Received Proceeding
CCIF_Proc - PRIM_BTYPE
CCIF_ProcPrim: Dsl_ID=1 Prim_ID=341
L3_Go: src=400, dslid=1, call_id=32809, event=340
L3_Go - new: event=aa cr_len=2 cr=0
L3_Go - default
NLCB=2d67d8, ignore_msg=0
pkt=2e40c0
CallRefLen=2
L3_Go: src=400, dslid=1, call_id=32809, event=340
L3_Go - new: event=a9 cr_len=2 cr=0
L3_Go - default
NLCB=2d67d8, ignore_msg=0
pkt=2c2c64
CallRefLen=2
L2_Go: L2_PktIn=2e20ec, hdr=2e40c0, proto=0, src=300 0 0 0
L2_Go(): DSL_Id=1, SAPI=0, CES=1, TEI=0, Event=240
D1: send 00 01 2e d8 08 02 00 4a 7d 08 03 80 e4 1e 14 01 03
D1: recv 00 01 01 30
L2_Go: L2_PktIn=2e2d38, hdr=2e05bc, proto=0, src=200 0 1 1
L2_Go(): DSL_Id=1, SAPI=0, CES=1, TEI=0, Event=1
L2_Go: L2-NoPkt dslid=0, src=20a, event=1250
L2_Go(): DSL_Id=0, SAPI=0, CES=1, TEI=0, Event=1250
EXPIRY TIMER 203
D0: send 00 01 01 6d
D0: recv 00 01 01 3b
L2_Go: L2_PktIn=2c2c64, hdr=2e2d38, proto=0, src=200 0 1 1
L2_Go(): DSL_Id=0, SAPI=0, CES=1, TEI=0, Event=1
L2_Go: L2-NoPkt dslid=1, src=20a, event=1250
L2_Go(): DSL_Id=1, SAPI=0, CES=1, TEI=0, Event=1250
EXPIRY TIMER 203
D1: send 00 01 01 d9
D1: recv 00 01 01 31
L2_Go: L2_PktIn=2e05bc, hdr=2c2c64, proto=0, src=200 0 1 1
L2_Go(): DSL_Id=1, SAPI=0, CES=1, TEI=0, Event=1
L2_Go: L2-NoPkt dslid=0, src=20a, event=1250
L2_Go(): DSL_Id=0, SAPI=0, CES=1, TEI=0, Event=1250
EXPIRY TIMER 203
D0: send 00 01 01 6d
D0: recv 00 01 01 3b
L2_Go: L2_PktIn=2e2d38, hdr=2e05bc, proto=0, src=200 0 1 1
L2_Go(): DSL_Id=0, SAPI=0, CES=1, TEI=0, Event=1
isdn_hangup: S16, dsl = 0
CCIF_Proc - PKG_BTYPE
CCIF_ProcPkg: stype = 11, dslid = 0
L3_Go: src=400, dslid=0, call_id=4229, event=340
L3_Go - new: event=84 cr_len=2 cr=833d
L3_Go - default
NLCB=2d44cc, ignore_msg=0
pkt=2e05bc
CallRefLen=2
L2_Go: L2_PktIn=2c2c64, hdr=2e40c0, proto=0, src=300 0 0 0
L2_Go(): DSL_Id=0, SAPI=0, CES=1, TEI=0, Event=240
D0: send 00 01 3a 6c 08 02 83 3d 45 08 02 80 90
D0: recv 00 01 01 3c
L2_Go: L2_PktIn=2e5f10, hdr=2e2d38, proto=0, src=200 0 1 1
L2_Go(): DSL_Id=0, SAPI=0, CES=1, TEI=0, Event=1
D0: recv 02 01 6c 3c 08 02 03 3d 4d
L2_Go: L2_PktIn=2e05bc, hdr=2e5f10, proto=0, src=200 2 1 6c
L2_Go(): DSL_Id=0, SAPI=0, CES=1, TEI=0, Event=0
D0: send 02 01 01 6e
L3_Go: src=20a, dslid=0, call_id=0, event=241
L3_Go - new: event=4d cr_len=2 cr=833d
L3_Go - default
NLCB=2d44cc, ignore_msg=0
pkt=2e05bc
CallRefLen=2
CCIF_Proc - PRIM_BTYPE
CCIF_ProcPrim: Dsl_ID=0 Prim_ID=341
L2_Go: L2_PktIn=2df8f0, hdr=2e44ac, proto=0, src=300 0 0 0
L2_Go(): DSL_Id=0, SAPI=0, CES=1, TEI=0, Event=240
D0: send 00 01 3c 6e 08 02 83 3d 5a
host_proc: from=400, to=0:1, type=5, len=8
S16: Received Clear Conf (B17 ID:1085)
D0: recv 00 01 01 3e
L2_Go: L2_PktIn=2e05bc, hdr=2e5f10, proto=0, src=200 0 1 1
L2_Go(): DSL_Id=0, SAPI=0, CES=1, TEI=0, Event=1
S40: Connection Failed
Thanks!
-Scott
> -----Original Message-----
> From: James Courtier-Dutton [mailto:dutton@livingston-ent.co.uk]
> Sent: Sunday, February 28, 1999 6:10 PM
> To: A PM3 User; portmaster-users@livingston.com
> Subject: RE: (PM) PM3 Dial Back Troubles
>
>
> If you want to get a useful debug trace of a dialout.
> Do:
> set debug isdn d0
> set debug isdn-d d0
> set debug isdn-l1 d0
> set console
>
> set debug isdn-max is no much good to tracing your problem.
> All the debug commands give different output.
> Post the output from the above commands and you should be sorted.
> Also, post the "sh glob"
> Cheers
> James
>
>
> > -----Original Message-----
> > From: owner-portmaster-users@livingston.com
> > [mailto:owner-portmaster-users@livingston.com]On Behalf Of A PM3 User
> > Sent: Sunday, February 28, 1999 08:48
> > To: Thomas Kinnen; portmaster-users@livingston.com
> > Subject: RE: (PM) PM3 Dial Back Troubles
> >
> >
> > Greetings....
> >
> > > Subject: Re: (PM) PM3 Dial Back Troubles
> >
> > > "Scott A. Karlo" wrote:
> > > > pm1> show location SMB
> > > >
> > > > Location: SMB Type: Manual
> > > > Destination: Negotiated Netmask: 255.255.255.0
> > >
> > > Not good. You should set the address you are asigning them not
> > > just letting
> > > them pick ANY address. Also do yout really want to route them 255
> > > addresses?
> >
> > I understand about the address and we'll fix the routing,
> right now we're
> > just trying to get the PM3 to actually dial-out... it doesn't seem to be
> > doing this and I can't tell where it is halting, be it the PRI being
> > mis-configged or us having something flaky with the PM3 port config... I
> > would think that if it were set up properly to at least call
> out that the
> > phone attached to the line the modem is attached to we would hear
> > this phone
> > ring but we don't.
> >
> >
> > > > Protocol: PPP Options: Quiet, VJ-Comp, Analog
> > > > Group: 2 Max Ports: 2
> > > > Idle Timeout: 0 minutes High Mark: 0 bytes
> > > > Mtu: 1500 Async Map: 00000000
> > > > Username: karlosa Password: XXXXXXXX
> > > > Telephone: 8779194
> > >
> > > What is at te other end? You do not need a script is it is a PAP
> > > compatiable router. ALso have you tried a PPP debug also?
> >
> > The other end has been both a Win95 box with the dial-up server
> > running and
> > an NT4 box... no luck.
> >
> > Running PPP Decoder on the port only gives:
> >
> > CCIF_Proc - PRIM_BTYPE
> > CCIF_ProcPrim: Dsl_ID=0 Prim_ID=341
> > CCPMSG_InCall - Accepting invalid Called Number
> > S40: Connection Failed
> > CCIF_Proc - PRIM_BTYPE
> > CCIF_ProcPrim: Dsl_ID=0 Prim_ID=341
> > CCPMSG_InCall - Accepting invalid Called Number
> >
> >
> > This continues but there was only one requested connection and
> > watching the
> > port in PMVision only one visible attempted connection.
> >
> > So what I am wondering is:
> >
> > 1) If we have the PM3 configured enough to do a proper
> dial-out, would we
> > not hear that cal coming in on a phone connected to the line?
> >
> > 2) Is there any idication that the problem is in the
> configuration of our
> > line (PRI)?
> >
> > Thanks much!
> > -Scott A. Karlo
> > President
> > SpeedyNet Internet Services, a Division of CompuWeb, Inc.
> > 330.877.8892 or toll free 888.8.SPDYNET fax 330.877.1524
> > info@speedynet.net http://www.speedynet.net/
> > Web Hosting * Internet Access * Dedicated Lines * Friendly Service
> > "We re-define the concept of SERVICE, give us a call!"
> >
> >
> > -
> > To unsubscribe, email 'majordomo@livingston.com' with
> > 'unsubscribe portmaster-users' in the body of the message.
> > Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
> >
>
>
>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>