I've been attempting my first go at setting our portmaster 3 up for Dial
Back sessions for dedicated customers. But we seem to be hitting a snag and
I can't find the bugger... I'm just not certain whether it is telco related
or I'm missing something blatantly obvious - something tells me it is the
latter of the two...
Anyway, I have created a location:
>>>BEGIN PASTE<<<
pm1> show location SMB
Location: SMB Type: Manual
Destination: Negotiated Netmask: 255.255.255.0
Protocol: PPP Options: Quiet, VJ-Comp, Analog
Group: 2 Max Ports: 2
Idle Timeout: 0 minutes High Mark: 0 bytes
Mtu: 1500 Async Map: 00000000
Username: karlosa Password: XXXXXXXX
Telephone: 8779194
Dial Script: Send Command Wait for Reply
------------------------------ ----------------------------
--
ATDT8778892\r CONNECT
\r ogin:
karlosa\r ssword:
XXXXXXX\r ppp
>>>END PASTE<<<
Which appears to be fitting with the documents I've read through...
We have configured the following port to handle this dial-back location for
us:
>>>BEGIN PASTE<<<
pm1> show S40
--------------------- Current Status - ISDN Port
S40 ------------------------
Status: IDLE
Input: 0 Abort Errors: 0
Output: 558 CRC Errors: 0
Pending: 0 Overrun Errors: 0
TX Errors: 0 Frame Errors: 0
Modem Status: DCD- CTS+ TELCO+ Disconnect:
Active Configuration Default Configuration (* = Host
-------------------- --------------------- Can
Override)
Port Type: Login/Netwrk Login/Netwrk (Dial In & Out)
Login Service: PortMaster PortMaster
Line Speed: 64000 64000
Hosts: default
Terminal Type:
Login Prompt: $hostname login:
Idle Timeout: 15 minutes
Dial Group: 2
Login Message: CompuWeb (330)-877-8892
Directory No:
>>>END PASTE<<<
When i do a dial from the telnet session I get:
>>>BEGIN PASTE<<<
Starting dial to location SMB using S40
sendthem (VRA8779194)
S40: Sending Call Request - 8779194 (VOICE)
expect (=DCD=)
S40: Received Proceeding
S2: Sending Disconnect Request
S2: Received Clear Conf (B3 ID:f1)
S40: Connection Failed
>>>END PASTE<<<
I'm also able to dial in with the appropriate user and pass and get
disconnected then the Portmaster will attempt to call back (able to view the
attempt in PMVision). But no go....
Oddly enough I don't hear the phone ring here at the location...
I have the potential to pick up a dedicated customer once I get this solved,
preferrably today if possible, I'll be one happy camper...
I feel as though it is something stupid I'm missing and we've reviewd the
docs, and reviewed the docs... oh and did I say I reviewed the docs? Hit
the help files... searched the archives but nothing seems to relate...
If you need more info feel free to ask I'll provide... if you could possibly
throw me a bone on how to get you the info (my sysadmin is out and has been
out and I've been the make-shift admin, but so far seem to be fareing
well...
By the way, any interest / IRC-ers out there / in starting a Portmaster
channel, I've not found any on EF-net.
Thanks a million!
-Scott AKA Bozemont
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>