(PM) CISCO 760
Daniel Henry (sysadmin@koyote.com)
Thu, 25 Feb 1999 10:13:52 -0600
I have a customer with a cisco 760 ISDN router ... he's dialing into a
PM3 at my end ... I am assigning him a subnet with a netmask of
255.255.255.240 .... the router will dial up and connect ... and I can
ping the WAN interface ... but not the ethernet. If I telnet in I can
ping both interfaces + his localnet from the router. Everything seems to
work except for packets getting to his local net from the outside. he can
ping the outside world from his localnet. All the routes in the 760 look
right. .. and I have tried it 10000 different ways... but no-go getting
from the outside to his local net. Anybody had any experience with these
Cisco ISDN routers .. they are much different from the standard Cisco IOS.
I think the problem may be related to the way it handles the routing table
for each interface .. through different profiles ... any help is
appreciated.
Thanx
--------------------------------------------------------------------------
Daniel Henry e-mail: sysadmin@koyote.com
Vice President / Systems Administration
Koyote Internet
PO Box 0299 Phone: (903)886-8767
Commerce, TX 75429 Fax: (903)886-2328
--------------------------------------------------------------------------
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>