Again - regarding OSPF
I need to advertize routes from various ip classes from dialin
users on two PM25 connected via eth to CISCO and the rest of my network.
What I have done after first reading OSPF manuals was:
on PM1:
set ospf enable
save all
reboot
add ospf area 1
set ospf area 1 range 10.10.10.0/24
set ospf area 1 range 10.11.11.0/26
set Ether0 ospf on
save all
reset ospf
on PM1:
on PM2:
set ospf enable
save all
reboot
add ospf area 1
set ospf area 1 range 10.10.10.0/24
set ospf area 1 range 10.11.11.0/26
set Ether0 ospf on
save all
reset ospf
on CISCO:
router ospf 1
network 10.11.11.0 0.0.0.63 area 1
network 10.10.10.0 0.0.0.255 area 1
area 1 range 10.10.10.0 255.255.255.0
area 1 range 10.11.11.0 255.255.255.192
And I dont see any changes in routing tables neither on CISCO nor
on PMs. What is wrong ? Or what is about to be reconfigured ?
Regards
Savit
Andrzej Stella-Sawicki <Savit@Sav.NET>, <savit@altavista.pl>
Polbox Sp. z o.o. http://www.polbox.pl/
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>