Re: (PM) PPPSmartAgent 1.0b5 available for open-beta (fwd)

Roy (garlic@garlic.com)
Thu, 11 Feb 1999 20:04:43 -0800

I think you are wrong on this one. Dial in with something like
hyperterminal and DON'T use PPP. Access as !root and login. Turn
debugging on. Disconnect and watch the fun as someone tries a PPP
connection while debugging info comes out the port.

MegaZone wrote:
>
> Once upon a time Stephen Zedalis shaped the electrons to say...
> >authentication. The debug goes wherever the PM thinks the console is and
> >it has been shown in the past that this frequently can be a dial-in port.
>
> Huh? The only time it will ever go to a serial port is if console is
> set there. Either you have to be directly connected to the serial port
> and 'set console' or do a 'set console s#' from the command line for it
> to point to a serial port. If debugging is left on any input is going to
> 'console' so it will go where console last was - and unless it was aimed at
> a serial port, that'd be the telnet interface.
>
> -MZ
> --
> -=*X GOT CLUE? ISPF II - SAN DIEGO, CA 3/6-10 <URL:http://www.ispf.com/> X*=-
> <URL:mailto:megazone@megazone.org> Gweep, Discordian, Author, Engineer, me..
> Join ISP/C Internet Service Providers' Consortium <URL:http://www.ispc.org/>
> "A little nonsense now and then, is relished by the wisest men" 781-788-0130
> <URL:http://www.megazone.org/> <URL:http://www.gweep.net/> Hail Discordia!
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-users' in the body of the message.
> Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>