Re: (PM) Palmtop Connection Problem

Thomas Kinnen (tkinnen@livingston.com)
Wed, 10 Feb 1999 08:22:51 -0800

Messages sorted by: [ date ][ thread ][ subject ][ author ]
Next message: Larry D Snyder, CEN, RN: "(PM) pm3E and PL75A"
Previous message: Joe Kupiszewski: "(PM) Limit simultaneous logons..."
Maybe in reply to: Collyer Dan: "(PM) Palmtop Connection Problem"

Collyer Dan wrote:

> We have a portmaster 2e30 with 10 isdn ports and 10 async ports. When I dial
> into it with a laptop everything works just fine. When I dial in with a
> handheld device running Windows CE the device will connect, validate with
> the radius server, negotiate a connection and assign an IP. After connecting
> you cannot ping the remote device even from the portmaster. I can use the
> same setup on the CE box and dial a USR or 3com box and everything works
> fine. Has anybody seen something like this?

Are you using the same User-Name for both tests? What does the port
look like when you are connected and what does the routing table look
like? It sounds like a routing issue. Have you tried a ptrace to see
if data was coming in or out of the port?

----
Thomas C Kinnen - <tkinnen@livingston.com> <tkinnen@ra.lucent.com>
"All of the opinions stated above are my own and not my employer's,
unless they were given to me by my employer"
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>

Next message: Larry D Snyder, CEN, RN: "(PM) pm3E and PL75A"
Previous message: Joe Kupiszewski: "(PM) Limit simultaneous logons..."
Maybe in reply to: Collyer Dan: "(PM) Palmtop Connection Problem"