> >> > We have many users with Rockwell HCF based modems, and they all
> >> >appear to be having trouble connecting to our PM3's with ComOs 3.8.2.
> >> >Does anyone have an Init String that provides good results with these
>=20
> >They also seem very sensitive to the condition of the phone lines; I hav=
e
> >seen many instances where any HCF modem works well (albeit with high pin=
g
> >times usually) from one location, but absolutely refuses from another.=
=20
>=20
> In my case with the Acer and the Diamond, the only thing that changed was
> the modem... i.e., same computer, same telephone line, same PRIs dialed
> into... Thinking it was just a bad Acer, I tried 2 others with pretty wel=
l
> the same results.
Could have been modem "bios" version - we currently have problems with
Aztech's offering with HCF - the software for it is version 2.1.2.123, and
in my experience, anything below 2.1.2.134 or 135 is pretty much crap.
Granted, even at that software version they are crap, but slightly less
crap than at the lower version. ;)
Can't seem to find any upgrade to the latest code on their site either
so now I have to deal with several dozen irate people who bought these
Aztech crap modems unwittingly with their computers.
Mvh,
=09Kimmo.
-----------------------------------+-------------------------------------+ Kimmo Jaskari | =C5LCOM - =C5lands Datakommunikation Ab = | E-mail: kimmo@alcom.aland.fi | http://www.alcom.aland.fi | http://www.alcom.aland.fi/kimmo | Phone: +358-(0)18-12122 | ---------------------------------+-------------------------------------+
- To unsubscribe, email 'majordomo@livingston.com' with 'unsubscribe portmaster-users' in the body of the message. Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>