When I reboot a PM2i that has worked flawlessly for several years, I see this:
isdn2> sho mem
System memory 1048576 bytes - 895172 used, 153404 available
144:1 96:0 128:0 80:5 272:2 16:9 32:5 48:1
System nbufs 1400 - 84 used, 1316 available
...however, after a few short hours, I get to this:
isdn2> sho mem
System memory 1048576 bytes - 1048440 used, 136 available
2048:4 160:6 1152:0 640:0 176:0 144:5 96:3 128:4 80:620 272:4 16:57 32:0 48:6
System nbufs 1400 - 83 used, 1317 available
...and as a result, new calls can't come in, routing gets crazy, packet delay & loss goes through the roof, etc. The only way to fix this is to reboot the unit. I've tried various ComOS 3.7 revs and nothing changes.
I suspect strongly that this coincides with the fact that three of my BRIs are having some kind of problem whereas they show NO-SERVICE but otherwise looks normal:
--------------------- Current Status - ISDN Port S12 ------------------------
Status: NO-SERVICE
Input: 0 Abort Errors: 0
Output: 0 CRC Errors: 0
Pending: 0 Overrun Errors: 0
TX Errors: 0 Frame Errors: 0
Modem Status: DCD- CTS+ TELCO+ NT1+ Disconnect:
Is this a known problem? Has anyone experienced anything like this? I have physically REPLACED the PM2i and the problem persists, making me believe this has to be some kind of a memory leak in ComOS...?
Thanks for any advice you can provide.
Jared
>-> Jared Reimer, System Admin
<-< oz.net Internet Services
>-> (206) 443-8000 || (888) SENSE-80
<-< http://www.oz.net/
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>