> try slowing down the port speed to the modem and verify that Hardware
handshaking is enabled.
either that or the port isn't set to 8n1
>
> -----Original Message-----
> From: Stephen Johnson [SMTP:srjohnson@integrityonline19.com]
> Sent: Tuesday, February 02, 1999 9:37 AM
> To: portmaster-users@livingston.com
> Subject: (PM) RE: Portmaster Users Digest V99 #25
>
> > From: Thomas Kinnen <tkinnen@livingston.com>
> > Date: Mon, 01 Feb 1999 13:44:38 -0800
> > Subject: Re: (PM) Harmony modem
> >
> > Stephen Johnson wrote:
> >
> > > I have a customer that has a Harmony Rockwell K56 Flex
> > > (HM18020.3) and is trying to connect to our Portmaster 3 with 3.8. I
> > > have emailed Harmony tech support with no response. Looking on
> > > their web site there is apparently no v.90 upgrade for this modem.
> > > Will a K56 Flex modem make a 56k connection with v.90? Right
> > > now I have +ms=11,0 in the extra settings disabling Flex to make a
> > > 26.4k connection. Any suggestions for this modem?
> >
> > No, A KFlex modem will make a 56K connect with KFlex. The PM3
> > SUpport KFlex
> > so it should work. What happens when you try to connect? Have you tried
> > dialing in witha plane terminal?
> >
> > Tom
> > - -
>
> When I tried dialing in with HyperTerminal it just put out garbage on the
> screen, no login prompt. What does this mean?
-- Aloha from Paradise,Sherwood Got Clue? If so: ISPF! The Forum for ISPs by ISPs, <http://www.ispf.com>
- To unsubscribe, email 'majordomo@livingston.com' with 'unsubscribe portmaster-users' in the body of the message. Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>