>
> You have a Gateway Telepath for Windows modem with X2 and the part
> number is 6000639. You can locate the update for your modem at this URL:
>
>
ftp://ftp.gw2k.com/pub/hardware_support/drivers/win_95/other_peripheral/7502
311.exe
>
> You will need to copy the downloaded file to and empty directory and
> expand it. That those expanded files and copy them to a formatted
> diskette. Then do the following.
>
> 1. Go to the Control Panel
> 2. Find the Telepath icon and open it
> 3. Run the uninstall option.
> 4. Check the Device Manager to make sure the modem is gone.
> 5. Remove any Unknown Devices in the Device Manager.
> 6. Find and rename the Telepath.drv and Telepath.inf files
> 7. In the INF directory in Windows find the OEM#.inf and the *.bin files
> and delete them. (# = a number)
> 8. Turn the computer off for about 10 minutes
> When restarting the computer use the diskette to install the modem when
> it is found
>
> Michael Wolfe
> Online Technical Support Professional
> Gateway USA
>
-----Original Message-----
From: Rick Krug <rick@tcccom.net>
To: jay <jay@dam.net>
Cc: portmaster-users@livingston.com <portmaster-users@livingston.com>
Date: Monday, July 27, 1998 9:48 AM
Subject: Re: (PM) gateway telepath with x2
>
>Try "S32=32" on the Telepath and see if that helps. I think that disable
>V.90 on a Sportster.
>
>On Mon, 27 Jul 1998, jay wrote:
>
>> Date: Mon, 27 Jul 1998 07:44:24 -0500
>> From: jay <jay@dam.net>
>> To: portmaster-users@livingston.com
>> Subject: (PM) gateway telepath with x2
>>
>> >> PM3 - 3.8b15
>> >> Telepath for Windows with x2. (Don't think it is flashed v.90).
>> >> Connect speed only 31k.
>> >> What is the init string to force it to 56K?
>> >
>> >If it is not flashed to v.90 then there is none. Remember, PM3's don't
>> >support x2, they only support k56flex and v.90.
>>
>> I also had lots of problems getting telepaths to negotiate. The
>> gateway website says you cannot use any other usr v90 upgrade,
>> you have to use theirs, and its not out yet, as of 2 weeks ago.
>>
>> &K0 didnt help.
>>
>> Jay
>>
>> -
>> To unsubscribe, email 'majordomo@livingston.com' with
>> 'unsubscribe portmaster-users' in the body of the message.
>> Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
>>
>
>-
>To unsubscribe, email 'majordomo@livingston.com' with
>'unsubscribe portmaster-users' in the body of the message.
>Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>