Re: (PM) PM2 to NT4

Gary McKinney (gmckinney@megabits.net)
Sun, 26 Jul 1998 01:17:31 -0400

If you get this to work I would be interested - worked on this for 6 hrs one
day and never could get the NT to respond to the PM2 PPP initial connection
query - nor could I get the RRAS to initiate the connection and keep it
active - the "best" I could get was the RRAS to initiate the connection with
the PM2 setup as dialup answer - then the NT would go all the way through
the connection sequence up to the final steps to open the PPP connection
when the NT would drop the connection...

gm...

-----Original Message-----
From: Jake Messinger <jake@ams.com>
To: Dan Struthers <dstruth@bserv.com>
Cc: portmaster-users@livingston.com <portmaster-users@livingston.com>
Date: Saturday, July 25, 1998 3:08 PM
Subject: Re: (PM) PM2 to NT4

>On Sat, 25 Jul 1998, Dan Struthers wrote:
>
>> Hi;
>>
>> A little off topic but I am trying to get an NT V4.0 box to talk to a
PM2
>> via a null modem cable. I am going to use this as a bandwidth limiter for
>> the NT 4.0 box. I however, can't figure out the NT RAS outgoing dialer
>> modem.inf entry that would be appropriate. The M$ site is less than
helpful
>> as well. Any suggestions?
>
>Cant you just set it up for Direct connect to com?
>
>~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~
>Jake Messinger ph:713-772-6690 Lucent Dealer
>AMS, Inc. fx:713-774-3498 Medical Billing
>8300 Bissonnet #400 jake@ams.com Internet Services
>Houston, Texas 77074 www.ams.com/~jake Business Management
>~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~
>
>-
>To unsubscribe, email 'majordomo@livingston.com' with
>'unsubscribe portmaster-users' in the body of the message.
>Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
>

-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>