I'm new at this and am having trouble getting this figured out.
DialOut/IP is looking for a network address and port for each Com port
you set up. I'd like to only setup one com port at the ws that would
access the pool of 3 modems (which ever is available at the time).
Do I tell DialOut/IP that the ip address is the ether port of our PM2 or
do I have to assign an ip address to each (s17-s19) asyn port?
If I have to assign an ips address to each asyn port, how do I have a
pool of modems?
Do I assign the 3 asyn ports the same port number (6001)?
DialOut/IP also lets you "Use Telnet Protocol". Should I do this?
Which Device and Login service should I use "telnet" or "netdata"?
Should I use the group command?
Sorry for the basic questions?
I looked on Livingston's site for info related to this. If you know of
such an animal, I would appreciate the direction.
Thanks
Steve Fogelson
IPS Incorporated
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>