Don't think it's the telco. All the other customers fine and
the ones with problems can connect else where.
Andy
>
> Try putting 3 commas after the customers dial in #. Works for me
> sometimes...or go to 3.8b15, that fixed alot of connect bugs for me.
>
> It could be a telco problem also.
>
> # Matt Chambers
> # The PressRoom Online Services
> #
> # Voice: 703-631-5755
> # Fax: 703-502-8649
> #
>
>
> On Wed, 22 Jul 1998, Andy Kirkham wrote:
>
> > iHi there all
> >
> > I have a problem with users logging into my pm3 (3.7.2c3)
> >
> > They are logging in from w95 boxes using dial-up networking.
> > The error message is "The remote computer has disconnected you..."
> > However the line is still open and is dropped a while later.
> > If I use hyperterminal using ATDTxxxxxxx then I can logon.
> > But using the hyperterminal dialer causes the same fault. The
> > modems being used to dial in are all new ones of different types.
> > Nothing is reported in the log files and the tcp/ip bindings are
> > all normal. To cap it all, they say they "can login their other
> > isps". I can also logon as them from my computer at home. Hmm
> > I'm confused.
> >
> > Anyone any ideas?
> >
> > Andy
> > -
> > To unsubscribe, email 'majordomo@livingston.com' with
> > 'unsubscribe portmaster-users' in the body of the message.
> > Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
> >
>
>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>