RE: (PM) LT Winmodems & PM3
Richard Gamberg (bbhi@prodigy.net)
Sun, 19 Jul 1998 07:31:08 -1000
-> -----Original Message-----
-> From: owner-portmaster-users@livingston.com
-> [mailto:owner-portmaster-users@livingston.com]On Behalf Of Jerry Bacon
-> Sent: Sunday, July 19, 1998 6:25 AM
-> To: portmaster-users@livingston.com
-> Subject: (PM) LT Winmodems & PM3
->
->
-> > -----Original Message-----
-> > Subject: Re: (PM) Two weeks later, and still no working ComOS
-> >
-> > Agreed. That's what makes the LT WinModem/PM3 interoperability so
-> > disconcerting.
->
-> AFAIK Lucent, does not actually make either the actual modem
-> card or provide
-> the code for the "LT Winmodems". They do use a Lucent Tech. DSP, but the
-> actual modem hardware and code are done by the OEM. (The design
-> of both may
-> be based on a reference design done by Lucent.)
->
-> Also, keep in mind that until recently Livingston (PM3) had no direct
-> connection to Lucent (LT Winmodem).
->
Lucent doesn't make the actual modem, but they do develop the code.
And except for Compaq, any "brand" of the LT Win Modem will work with
firmware developed for any other "brand". The latest available firmware is
5.14 (v90/Flex simultaneous support), and you can find links to it and
versions 5.10, 5.09 (v90) and 4.31, 4.28, etc. on my site.
Aloha,
Richard
http://pages.prodigy.net/bbhi/r-rnut-x2.htm 56k=v.Unreliable
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>