chadb
-------------------------------------------------
Chad D. Bryant - Software Engineer
Lucent Technologies Remote Access Business Unit
chadb@livingston.com (510)737-2218
4464 Willow Road, Pleasanton, CA 94588
-------------------------------------------------
-----Original Message-----
From: owner-portmaster-users [mailto:owner-portmaster-users]On Behalf Of
Patric Sandelin
Sent: Monday, June 29, 1998 4:11 AM
To: portmaster-users
Subject: (PM) USR PalmPilot and PM3
Hi!
A customer is trying to connect to a PM3 with a USR PalmPilot but with
no success, anyone also had problem with it?
The radius entry looks like this..
login Password = "password"
Service-Type = Framed-User,
Framed-Protocol = PPP,
Framed-IP-Address = 255.255.255.254,
Framed-Routing = None,
Framed-Compression = Van-Jacobson-TCP-IP,
Port-Limit = 1
and if I do a PPP debug on it it looks like this...
S9: Sending Request Connect - 64Kbps / Voice (B29 ID:109)
Sending LCP_CONFIGURE_REQUEST to port S9 of 24 bytes containing:
01 01 00 18 02 06 00 00 00 00 05 06 8C 7F 81 70 07 02 08
02 03 04 C0 23
Packet Info: Code: 0x01, ID: 0x01, 24 bytes.
Async-Control-Character-Map [0x02], length: (6 bytes),
[0x00000000]
Magic-Number [0x05], length: (6 bytes), [0x8C7F8170]
Protocol-Field-Compression [0x07], length: (2 bytes)
Address-and-Control-Field-Compression [0x08], length: (2 bytes)
Authentication-Protocol [0x03], length: (4 bytes), Password
Authentication Protocol [0xC023]
S9: Sending Disconnect Request
S9: Received Clear Conf (B29 ID:109)
Thats it nothing else happens, a WindowsCE toy connects just fine but
this PalmPilot refuses totally.
Any hints?
Best regards!
/Patric
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>