PM3 comos 3.7.2
I was messing with the stac command- I never see any reference to stac in
my sh sxx command. But somehow in the process, I disabled s22.
Do I need to reboot the PM3 before the save all command is actually
effective?
Any advice is appreciated. Not an emergency, but I need to fix it.
Thanks-
-Jeff
Command> sh s22
--------------------- Current Status - ISDN Port S22
------------------------
Status: IDLE
Input: 0 Abort Errors: 0
Output: 0 CRC Errors: 0
Pending: 0 Overrun Errors: 0
TX Errors: 0 Frame Errors: 0
Modem Status: DCD- CTS+ TELCO+ Disconnect: Incoming Call
Barred
Jeff Halper
Internet Hotline
408/881-1000 fax 408-293-3456
http://www.ihot.com
mailto:jeff@ihot.com
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>