Doug Michaud - Teleport Engineering
In message <Pine.LNX.3.96.980613100041.15229A-100000@corona.dnv.soltec.net>, Do
ug Nipper writes:
>Here's a trick I've used to do this:
>
>Open two telnet windows to the same PM. Use one window for the attach
>operation, and when done use the other window to "reset Sx", which is the
>port you attached to. You will see in the other window "connection
>closed", and it will be ready for the next attach operation.
>
>Doug
>
>On Thu, 11 Jun 1998, Stephen Zedalis wrote:
>
>>
>> While we are on the subject... If you telnet into a PM and "attach" to a
>> port to give the modem at commands, is there any graceful way of
>> unattaching from the port and returning to the PM command prompt other
>> than closing down the telnet session and starting a new one (Which can be
>> a pain if you have to do alot of modems)?
>>
>> The attach feature is pretty well undocumented and I haven't seen the
>> answer to this one.
>>
>> On Wed, 10 Jun 1998, Chad Schwartz wrote:
>>
>> >#1) Call them
>> >
>> >#2) attach s1 (or whatever port they are on) and AT<whatever>
>>
>> -
>> To unsubscribe, email 'majordomo@livingston.com' with
>> 'unsubscribe portmaster-users' in the body of the message.
>> Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
>>
>
>-
>To unsubscribe, email 'majordomo@livingston.com' with
>'unsubscribe portmaster-users' in the body of the message.
>Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>