Open two telnet windows to the same PM. Use one window for the attach
operation, and when done use the other window to "reset Sx", which is the
port you attached to. You will see in the other window "connection
closed", and it will be ready for the next attach operation.
Doug
On Thu, 11 Jun 1998, Stephen Zedalis wrote:
>
> While we are on the subject... If you telnet into a PM and "attach" to a
> port to give the modem at commands, is there any graceful way of
> unattaching from the port and returning to the PM command prompt other
> than closing down the telnet session and starting a new one (Which can be
> a pain if you have to do alot of modems)?
>
> The attach feature is pretty well undocumented and I haven't seen the
> answer to this one.
>
> On Wed, 10 Jun 1998, Chad Schwartz wrote:
>
> >#1) Call them
> >
> >#2) attach s1 (or whatever port they are on) and AT<whatever>
>
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-users' in the body of the message.
> Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>