If you use "Framed-IP-Netmask = 255.255.255.224," you will assigne an IP
to the caller from the IP pool, on the other hand you will specify an IP
for the caller.
The difference between Framed-IP-Address & Framed-Address is the first
generated by RADIUS 2.0.1 the second genereted by RADIUS 2.0. By the
way, you can generate the old log file in READIUS 2.0.1. Go to the
dictionary file in RADIUS 2.0.1 and read the beginning of the file.
Please correct me if I am wrong
Abdul
Jerry Bacon wrote:
>
> Which is better (or what are the tradeoffs), to "set user-netmask on" and do
> it like the example below, or to leave "user-netmask off" and use an
> explicit route like:
>
> Framed-Route = "2xx.1xx.1xx.241/29 2xx.1xx.1xx.241 1"
>
> Also, is there any difference between Framed-IP-Address and Framed-Address
> (or for that matter Framed-IP-Route and Framed-Route)?
>
> --
> Jerry Bacon
> Telcom+
>
> > -----Original Message-----
> > Subject: (PM) Netmask on dialup (fwd)
> >
> > Use this, after doing 'set user-netmask on'.
> >
> > caboose Password = "youwish"
> > Service-Type = Framed-User,
> > Framed-Protocol = PPP,
> > Framed-IP-Address = 209.57.244.128,
> > Framed-IP-Netmask = 255.255.255.224,
> > Framed-MTU = 1500,
> > Framed-Compression = Van-Jacobson-TCP-IP
> >
> > -MZ
>
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-users' in the body of the message.
> Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>