> > Is it possible to assign an address to the portmasters
> > isdn port, only for this user ?
>
> You can do a couple of things. You can assign a POOl of ips to the
> portmaster, or you can assign a specific ip address to the user. Can you
> make the conair thingy log in with a specific user name to get an ip
> address?
thats the normal case, ok.
But i'm looking for a configuration like this :
PORTMASTER ----- S10 ====== isdn-link ====== Portx --- CONWARE
| 10.10.11.1 10.10.11.2 |
Ether0 Ether
10.10.10.1 10.10.12.1
So i want the Portmaster to send 10.10.11.1 as his own address
in control-protocol packets and not the ether0 address.
But only for this user the interface (here s10) should be numbered.
> > > The second problem is:
> > the conware wants, that the portmaster doing
> > authentication via chap to him, when he dials in.
>
> Portmasters do chap. set chap on
chap works fine, thats not the point.
But our portmaster sends his systemname/adminpasswd
to the conware too.
Therefore the conware has to know our systemname/passwd in his
usertables :-(
Thanx,
Volker
+----------------------------------------------------------------------+
+ Volker Klau EMail: volker@microdata.de +
+ M I C R O D A T A Phone: +49-461-88 90 112 +
+ EDV-Beratung & Systemhaus FAX : +49-461-88 90 60 +
+ Xlink-PoP/Flensburg +
+ Mommsenstr. 14 - D-24943 Flensburg http://www.microdata.de +
+----------------------------------------------------------------------+
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>