-----Original Message-----
From: Brently The Admin [mailto:brently@vivid.net]
Sent: Tuesday, June 02, 1998 4:23 PM
To: portmaster-users@livingston.com
Subject: Re: (PM) Tricky OSPF problem
What about making the location on both pm's? Of course, one would always
try dialing, but it may solve this problem, at least until someone else
comes up with a better answer. ;)
Brent
At 02:06 PM 6/2/98 +0200, you wrote:
>Heres what my problem is:
>
>I have two PM3s linked with MCPPP.
>
>Normal dialin clients work just fine, also in MCPPP.
>
>An example of the problem:
>
>A client 212.37.0.15 255.255.255.255 has an on demand location
>configured, and dialout on demand works fine.
>
>It also works great if he calls in and hooks at least one channel to
the
>unit with his location profile.
>
>BUT when he calls in and hooks no channel to the unit with the location
>profile it stops working, as the location (Even though it starts a Vx
>session between the PMs) tries to call out and establish a connection.
>
>What I see is the following:
>
>PM1 - username out IDLE
>PM2 - username in estab
> username in estab
>
>I have tried to change the metric of the static route from the
location,
>but it resets it as it thinks he is locally connected.
>
>Does anyone know how to change ospf metrics to make it work, or could
>one get the MCPPP to understand and route the data correctly when a Vx
>session is established with no local channel?
>
>Regards
>
>Mikael Hugo
>-
>To unsubscribe, email 'majordomo@livingston.com' with
>'unsubscribe portmaster-users' in the body of the message.
>Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>