(PM) Location wont time-out

Jake Messinger (jake@ams.com)
Sun, 31 May 1998 10:00:04 -0500 (CDT)

I have just set up an On_Demand location with a pm25 dialing into another
pm. It dials in just fine, BUT, it dials in almost immediately, even if
there is nothing to route. And then the idle timer is ALWAYS 0 so it never
times out. How can I tell what is keeping the cdonnection alive?

Here are the settings:

System Name: eijones
Default Host: 207.235.58.129
Alternate Hosts:
IP Gateway: 207.235.58.169
Gateway Metric: 1
Default Routing: Quiet (Off)
Name Service: DNS
Name Server: 0.0.0.0
Domain: ams.com
Telnet Access Port: 23
Loghost: 0.0.0.0
Maximum PMconsole: 1
Assigned Address: 0.0.0.0
RADIUS Server: 0.0.0.0
Alternate Server: 0.0.0.0
Accounting Server: 0.0.0.0
Alt. Acct. Server: 0.0.0.0
PPP Authentication: PAP: on CHAP: on
Disabled Modules: SNMP OSPF BGP

Here is the location data:

eijones> sh ams
Location: ams Type: On Demand
Destination: 207.235.58.169 Netmask: 255.255.255.255
Protocol: PPP Options: Quiet, Compression
Group: 1 Max Ports: 1
Idle Timeout: 120 minutes High Mark: 0 bytes
Mtu: 1500 Async Map: 00000000

Dial Script: Send Command Wait for Reply
------------------------------
atdt2815520983\r ogin:
eijonesr\r assword:
<DELETEDFORSECURITY>\r PPP

I am NOT usung rip or ospf, I am statically routing 2 ip addresses via an
entry in the local pm route table.

~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~
Jake Messinger ph:713-772-6690 Lucent Dealer
AMS, Inc. fx:713-774-3498 Medical Billing
8300 Bissonnet #400 jake@ams.com Internet Services
Houston, Texas 77074 www.ams.com/~jake Business Management
~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~

-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>