(PM) PRI Problems

Pete Baumgartner (pbaum@fbs.net)
Fri, 22 May 1998 17:56:24 -0400

Perhaps someone on this group might be able to help me out. I have 3
Portmaster 3's all running Com OS version 3.8b13 and I cannot get any of
them to sync up to the PRI lines I had Sprint install. The units are
optioned for ISDN, b8zs and ESF and a show line0 shows that the line is
up and the receive level is between +2.5 and -7.5Db, but all the
differant errors continue to increment. Furthermore Sprint informed me
that they are unable to see my D channel at all. Sprint than sent a
technician out to test the connection locally and were unable to find
any problems with their lines whatsoever. They are able to loop my
Portmasters, and the signal back is clean, I can't beleive that I have 3
bad PM3's. Do I need to try a differant version of Com OS or can any
body give me some tips on what else I should look at?

Thanks

-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>