RE: (PM) CT1 busy?

John W Baxter (jwblist@olympus.net)
Tue, 19 May 1998 21:15:26 -0700

At 16:56 -0500 5/19/98, John Nowack wrote:
>>Check for the number of Caller ID (DNIS) digits they are sending
>>you -- It should be zero on a CT-1 and has been known to cause
>>problems with busy signals.
>I was told by GTE (way back when we set up our first PM3) that we were
>winking back too quickly. I had GTE insert one DNIS digit and all
>was well ever since.
>
>John
>
>--
>John Nowack
>john@dpc.net
>DPConsultants, Inc.
>Sys Admin -- dpc.net
>309-925-2451

We had a similar effect on a DMS-10 (but not a DMS-100--the switch in the
original question), so I kept quiet. 0 digits assured a fast busy; 1 digit
is working very well.

--John

John Baxter
General OlympusNet messages to: tcijb@olympus.net
OlympusNet Tech Support for Macintosh: mac-support@olympus.net
(360)385-0464 or (800)896-1751
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>