Re: (PM) PM3 - no 56 connects - receive level?

Ed Seiler (pman@rcia.com)
Sat, 16 May 1998 21:22:53 -0700

A quick check for padding is connect using hyperterm to the PM3.
Do a +++ to get to the modem command.
Do a "ath" to hang up.
Do a "at&v1" and it prints out the last connections information.
At the end it should give you the padding information.
At least it does on my Motorola (remember them? now owned by
the some former Motorola execs) and Zoomies.

Ed
RCIA <<Relatively Cheap Internet Access>>
Redmond, WA

>I just got my PM3 online and am not getting above 31k connects.
>Tried 2 diff. PCs with 2 diff Kflex modems, LT Win Modem and Zoom
>and the line I dialed with tested out ok with 3com/USR's test line.
>My first notion is that GTE screwed up again (I did order it
>trunkside - its CT1 not PRI). Before I go rant at them I thought
>I'd ask here if it could be a padding issue.
>
>PM3 info:
>
>pm3> version
>Livingston PortMaster PM-3 ComOS 3.7.2c3
>System uptime is 2 hours 44 minutes
>pm3> sho line0
>---------------------- line0 - T1 Inband DS0 ---------------
>
> Status: UP Framing: ESF Encoding: B8ZS PCM: u-law
>
> Signaling: Trunk E&M wink start
>
> Receive Level: +2dB to -7.5dB
>
> Alarms Violations
> ----------------------------- -----------------------------
> Blue 0 Bipolar 0
> Yellow 1 CRC Errors 0
> Receive Carrier Loss 0 Multiframe Sync 0
> Loss of Sync 0
>
>Does this all look normal? And is there anything else I should look at?
>
>TIA,
>
>Bruce
>info@sltic.com
>
>-
>To unsubscribe, email 'majordomo@livingston.com' with
>'unsubscribe portmaster-users' in the body of the message.
>Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
>

-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>