> I'm getting things like this when certain clients try to connect to our
> PM3.
>
> S0: Sending Request Connect - 56Kbps / Data (B1 ID:867)
> S0: Received Connect - B1
> S0: Received Disconnect Normal Clearing (B1 ID:867)
> S0: Sending Disconnect Request
> S0: Received Clear Conf (B1 ID:867)
This looks just like a normal ISDN session startup and shutdown.. Lines 1
& 2 are the the incoming call (which was a 56Kbs call). Line 3 is us
being told to disconnect by the network, ACK'ing the request (line 4), and
finally the network telling us it's done (line 5).
> This looks quite similar to what some of our clients were getting back
> when we were using BRI and a PM2ei. What's going on?
It should.
-jr
----
Josh Richards - <jrichard@livingston.com> - <josh@lucent.com>
[Beta Engineer] - LUCENT Technologies - Remote Access Business Unit
<URL:http://www.livingston.com/> * <URL:http://www.lucent.com/dns/>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>