Here is the radius entry
customer Password = "password"
Port-Limit = 2,
Idle-Timeout = 0,
Session-Timeout = 0,
Framed-Address = 209.4.50.113,
Framed-Route = "209.4.50.112/28 209.4.50.113 1"
Here is the ascend debug info
L: CALL CLEARED WITH CAUSE: 16 B1 #9088445
NL: CALL REQUEST: 64K, #9088445
NL: CALL CLEARED WITH CAUSE: 34 #9088445
NL: CALL REQUEST: 64K, #9088445
NL: CALL REQUEST: 64K, #9088445
NL: CLEAR REQUEST: B2
NL: CALL CLEARED WITH CAUSE: 16 B2 #908844
Here is the PM debug info
m3-1> reset s7
Resetting port S7
pm3-1> S7: Sending Disconnect Request
S7: Received Clear Conf (B8 ID:1c)
S7: Sending Request Connect - 64Kbps / Data (B8 ID:1e)
S7: Received Connect - B8
S8: Sending Request Connect - 64Kbps / Data (B9 ID:1f)
S8: Received Connect - B9
S8: Received Disconnect Normal Clearing (B9 ID:1f)
S8: Sending Disconnect Request
S8: Received Clear Conf (B9 ID:1f)
Any Ideas???
Integrated Network Solutions Corp. www.insc.net
305.436.0910 admin@insc.net Serving South Florida
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>