Below I have a comparison between a KFlex and x2 modem. Both connect at
50000k, (yes the USR at 50k too.) However, the Flex has a Recieve rate
of 26400 where as the USRs typically seem to be at 28800. I could care
less why, my question is with all the retrains on the USR side? While
the Flex's seem to have lower recieve and transmit rates here than the
USR x2's, they are quite zippy and seem to be faster via FTP, etc. Its
just all the Retrains that have me concerned. Also some USR users report
that it takes longer to log on since adding the PM3? The problem is not
in DUN by the way. Any ideas on the retrains, and slow log on times?
USR x2 Modem:
Card Type: Lucent Chipset
State: ACTIVE
Active Port: S23
Transmit Rate: 50000
Receive Rate: 28800
Connection Type: LAPM/V42BIS
Chars Sent: 12755785
Chars Received: 906001
Retrains: 56
Renegotiations: 0
Total Calls: 3
Modem Detects: 3
Good Connects: 3
KFlex Modem:
Card Type: Lucent Chipset
State: ACTIVE
Active Port: S11
Transmit Rate: 50000
Receive Rate: 26400
Connection Type: LAPM/V42BIS
Chars Sent: 22988921
Chars Received: 1622384
Retrains: 1
Renegotiations: 2
Total Calls: 10
Modem Detects: 10
Good Connects: 10
Ameritech, Our Link To Disaster
"On a day no different than the one now dawning, Leonardo drew the first
strokes of the Mona Lisa, Shakespeare wrote the first words of Hamlet, and
Beethoven began work on his Ninth Symphony." And Windows98 Crashed!
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>