(PM) b15 & Hung PM3

Tom T. Thai (tomthai@future.net)
Mon, 4 May 1998 10:38:00 -0500 (CDT)

I've ran b15 every since it was first available on one of our box with 1
CT1 and PRI. On Saturday, the PM3 locked up completely. No telnet, all
lines were bz out. The only way to bring the box back up was to power
cycle. No other changes were made to the box.

One thing that was happening was there was a dedicated customer with 2 B
channels. One channel was established fine. The other channel kept
dialing the remote client but couldn't establish. Not sure if this could
have brought the PM3 down.

When the PM3 was hung, the PRI line also locked up and the telco had to
reset the line. After the PM3 was back up and the PRI line was reset,
I've noticed that V.90 connects that were fine before now need to make
atleast 6-10 attempts to connect reliably.

.............. ....................................
Thomas T. Thai Infomedia Interactive Communications
tom@iic.net TEL 612.376.9090 * FAX 612.376.9087

-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>