Thank you.
I tired your filter :
add filter fer
set filter fer 1 deny 0.0.0.0/0 0.0.0.0/0 udp src eq 513
set filter fer 2 deny 0.0.0.0/0 0.0.0.0/0 udp src eq 138
set filter fer 3 permit 0.0.0.0/0.0.0.0/0 tcp
Set location romero ofilter fer
Save all
reboot
Problem:
My on-demand router continues redialing.
The router is on a TCP/IP and netbeui network.
May be a UDP or TCP request?
I tried to put only a PC with a IP of the same network that the router but
without gateway, so no PC can send pakets to the router. Only a PC can
connet the router.
But nothing, the same problem the router calls . There is not any rule (
every x minutes...)
is it possible to know the IP that actives the call? This way we could see
the source.
Any idea?
Thank you
Best regards,
Fernando Martin
interlinea2000
At 11:06 26/02/98 -0500, you wrote:
>Add this output filter to the location entry of the dial out router:
>
> 1 deny 0.0.0.0/0 0.0.0.0/0 udp src eq 513
> 2 deny 0.0.0.0/0 0.0.0.0/0 udp src eq 138
> 3 permit 0.0.0.0/0 0.0.0.0/0 ip
>
>
>Regards,
>Rod
>
>> -----Original Message-----
>> From: Fernando Martin [SMTP:marferfe@i2000.es]
>> Sent: Thursday, February 26, 1998 11:25 AM
>> To: portmaster-users@livingston.com
>> Subject: (PM) ISDN ondemand problems
>>
>> Hi all,
>>
>> First I must to explain that I have two OR-ST version 3.5L to connect
>> two
>> offices. One of them is the central ( Dial -in) the other one is the
>> remote
>> office ( dial-out).
>>
>> The firts one is configurated for only dial-in:
>> - S1 and S2 port Dial-in
>> - No table location
>> - NO gateway
>> - IPX disabled ( only IP)
>> - Routing ON (RIP)
>> - Table user with only a user accont : romero, assigned 192.168.200.1
>> ( dial
>> out router), routing on, compresion on...
>>
>> The second one is configurated for only dial-out:
>> - S1 and S2 port Dial-out
>> - No table user
>> - gateway 192.168.100.1( dial-in router )
>> - IPX disabled ( only IP)
>> - Routing ON (RIP)
>> - Table location with only one account : romero, xxxxx, 232456, idle
>> time=7
>> minutes, destination 192.168.100.1 ( dial-in router), routing on,
>> compression on......
>> elicegui> elicegui> ifconfig
>> ether0: flags=16<IP_UP,IPX_DOWN,BROADCAST>
>> inet 192.168.200.1 netmask ffffff00 broadcast 192.168.200.255
>> mtu 1500
>> ptp3: flags=fd<IP_UP,IPX_DOWN,POINT_TO_POINT,COMPRESS,SUSPENDED>
>> ???????????
>> dest 192.168.100.1 netmask ffffff00 mtu 1500
>> elicegui>
>>
>> Problem:
>>
>> - The dial out ( on-demand) router is all the time redialing to
>> dial-in
>> router. Why?
>> The configuration is ok, all is ok so?
>> There is not PC that could make external demands, and active the call
>> !!
>> Any idea?
>>
>>
>> I hope you could help me.
>>
>> Thank you very much
>>
>> Best regards,
>>
Fernando Martin
Interlinea2000
http://www.i2000.es
Voz:(943)-619101
Fax:(943)-618159
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>