>Hi all,
>
>I've manged to get Trumpet winsock working with Win 3.1 thanks to
>David Routh for providing the scripts. I'm using a Hayes Accura 28.8 V.34+FAX
>modem for this test and when I use Trumpet winsock, I get a full 28.8 connect.
>However, when I use the same modem in my Win95 machine with the new
>Win95 DUN+new winsock, I only get 9600. Does anyone have this problem with
>Hayes modems? Thanks.
>
Hmm, I have seen this problem in the past. Is it an external modem? If so are you using
at least a UART 16550? Sometimes if you are using an external modem your serial port properties
are defaulted to 9600 and if you are using an outdated modem.inf file you may only be seeing
the rate at which the modem communicates with the computer(I belive this is DTR instead of DTD - Sombody correct me if
I am wrong on those acronyms) but in most cases that is the problem. As long as the modem is still supported
you should be able to get at least an updated inf file. You might also try the Win95 Standard 28800 driver.
~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~
Dennis D. Baker, Jr. Providing High Quality Internet Service to
V.P. Southwest Louisiana and working towards a
DelTech Industries, Ltd. better Internet Community.
dbaker@deltech.net
<paraindent><param>out,out</param>www.deltech.net (318)
433-2225 Voice/Daytime Support
</paraindent>postmaster@deltech.net (318) 626-1813
Voice/Nightime Support
info@deltech.net (318) 436-9936 Fax
~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>