>
> We have a PM3 with ComOS 3.7.2 connected to a Cisco 2501 ( owned and
> operated by the Telco ). I have 2 Class C's one for the "home" network
> and is a 24 bit subnet. The other dialing up the PM3 and is a 28 bit
> subnet and has 16 networks. The Telco say's I can't use OSPF ( they
> don't support it ). What's the best way for me to route the 28 bit
> network thru the PM3 dialup ?
>
> Internet --- Cisco 1.2.230.254/24 ---- PM3 -----1.2.230.2/24
> ^
> .
> .
> .
> ( dialup )
> 1.2.231.0/28
>
Place a static route for that subnet (1.2.231.0/28) onto the Cisco:
ip route 1.2.231.0 255.255.255.240 <IP_address_of_PM3>
This will route the first /28 of 1.2.231.0 via the PM3. Of course, if you
don't have control of the Cisco you'll have to ask them to do this for
you. I'm a bit suprised that they won't let you use OSPF, since Cisco IOS
supports it just fine.
Does that answer your question?
----
Josh Richards - <jrichard@livingston.com> - [Beta Engineer]
LUCENT Technologies - Remote Access Business Unit
(formerly Livingston Enterprises, Inc.)
http://www.livingston.com/
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.