>Greetings! I trust you're starting to get settled into the new office
>by now?
Somewhat....
>The good news is I have the PMConsole software from the Livingston site
>and managed to get it to work. I've taken the opportunity to explore
>the various displays and stats. One thing I noticed was that on the
>ISDN 2nd B-channel the timeout does not set to the default correctly
>when unbonded from the 1st channel.
I'm not following you.... The idle-timeout is a RADIUS attribute that
we're passing in from RADIUS-NT. Its set to 600 seconds. BOTH channels
should take their timeout settings from the idle-timeout RADIUS attribute.
>In this screencap from the PMConsole, you may notice that the timeout
>for Morganna is set to 1 instead of 10 as everyone else is. This is
>causing Audi to lose connection after only 60 seconds of inactivity
>(hardly enough time to run upstairs, get some soda, and run back
>downstairs.
>
>I don't know if there is a setting to change this, or if it is a problem
>in the portmaster software itself, but it is something that you may want
>to take a look at when you can.
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.