We have the following situation:
We run 2 PM3's for serving dial-up customers.
Both PM3's share ONE same phone number. So if
customers dial-in they get either connected to
the first or the second PM3! So I cannot determine
to which PM3 they get connected when they dial in!
Now the problem comes with ISDN-LAN-LAN connections.
As these customers have their own IP address space
I must route their address space from the CISCO router to
the correct PM3! But as this can either be the first PM3
or the second PM3 I don't know where to set the route on the
CISCO? Both PM3 have as default route the CISCO router.
For now we only have 2 PM3's but there will be more
all sharing the same phone number so I really need
a solution.
Does OSPF help, or what else can I try?
(We use the CISCO 700 series on the client side
for ISDN LAN-LAN connections)
Our setup:
-----------
=================
¦ PM3_1 ¦ IP: X.X.Y.3
=================
¦
¦Ethernet LAN
=================
¦ PM3_2 ¦ IP: X.X.Y.5
=================
¦
¦Ethernet LAN
==================
¦CISCO 2500 router¦ IP: X.X.Y.1
==================
Thanks for all tips,
Christian Schmit
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.