I'm sorry, let me explain what I'm trying to do here.
We are going to have 2 PM3's with 48 lines in each chassis.
Now, this is where I'm a bit confused, the two T1 ports are for
the digital dial-up lines which will service 48 ports. You indicated
in your message below that line0 services your dialups. Does this
mean you only have 24 dialup lines? And the line1 is where you
plug your leased line connection.
In my case, I need both line0 and line1 to service my dialups, but where
do I connect my leased line? My understanding is that I get a external router
and plug that into the ethernet port on the PM3's. Will this work? Now
the CSU that will service my dial-up, line0 and line0 is the one built
into the PM3. I'm wondering do I need another CSU for my leased line?
According to MegaZone, I cannot use a external CSU with the PM3.
Thanks for all the help guys. I'm just trying to figure this all out and with
all your help, I'm getting there.
Daniel
-----
At 12:06 AM 2/1/98 -0500, you wrote:
>What are you trying to do here? I'm not sure I understand. I use a PM-3
>with the incomming channelized T1 (the incomming callers) into line0 on the
>PM-3. The other T1 port on the back of the PM-3 (line1) is connected to a
>T1 that has my upstream provider's router on the other end (this is my
>gateway to the internet). The ethernet port connects to my server (nt)
>machine. I am assuming you have a PM-3 with 2 T1 ports on it?
>
>
>Mark Radabaugh
>Amplex Internet
>Support@Woodville.Net
>-----Original Message-----
>From: Daniel Camacho <lists@cnmi.net>
>To: Mark Radabaugh <mark@woodville.net>
>Date: Saturday, January 31, 1998 11:55 PM
>Subject: Re: (PM) Re: CSU (fwd)
>
>
>>Hi Mark,
>>
>>Thanks for the reply. Enlighten me a little bit on this setup. What
>>port are you talking about here. Thanks.
>>
>>Daniel
>>
>>----
>>At 08:22 PM 1/31/98 -0500, Mark Radabaugh wrote:
>>>The internal is fine -- I have a dial-up on one port and a leased line on
>>>the other.
>>>
>>>Mark Radabaugh
>>>Amplex Internet
>>>Support@Woodville.Net
>>
>>
>>
>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.