Help set nameserver only says :- Usage: set nameserver Hostname|IP_Address
On Fri, 30 Jan 1998, Aaron (Zim) wrote:
> I noticed that when using the PPP protocol under PM3 and doing Win95 DUN
> >autologin, the PM3 returns the IP of the DNS server configured on the
> >PM3.
> >
> >Is there anyway to "return" two or more DNS server IPs either via RADIUS
> >on on the PM3 itself?
>
> w/ the win95 dialer, if its configured to server assigned dns address and
> you have a pri and sec dns server set on the portmaster win95 sees both..
> (If you are dialing with a modem) However dialing w/ ISDN seems to only get
> the pri dns server.. I haven't verified this w/ 3.7.2c3 however it was true
> w/ 3.7.2.
>
> Aaron
>
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-users' in the body of the message.
>
====================================================================
___ ___ _ _
/ __)/ __)( \/ ) Chen Shiyuan Tel : 4683955 x 16
( (__ \__ \ \ / csy@hjc.edu.sg Fax : 4674366
\___)(___/ (__) Network Administrator Hwa Chong Junior College
====================================================================
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.