I tried what you suggested but it didn't work. I'm using Gafton's 2.0.1C
radiusd. I get the following :-
PPP session from (203.127.29.5) to 0.0.0.0 beginning....~_}#+!}!}!}
}4}"}&} } } } }%}&}$}=}3-}'}"}(}"}%;~
The IP address seems to have disappeared...
My /etc/raddb/users file is as follows :-
DEFAULT Auth-Type = System, LOGINS = 1
Service-Type = Framed-User,
Framed-Protocol = PPP,
Framed-IP-Address = 203.127.29.191+,
Framed-MTU = 1500,
Framed-Compression = Van-Jacobson-TCP-IP,
Idle-Timeout = 300
Any idea what went wrong?
I have tried :-
1) set pool-size = 0
2) set assigned = 0.0.0.0
3) set assigned = myip + set pool-size = 30
Each followed by a reboot but to no avail.
What do you think?
On 29 Jan 1998, Miquel van Smoorenburg wrote:
> In article <Pine.LNX.3.95.980128233433.290j-100000@inorganic5.fdt.net>,
> Jon Lewis <jlewis@inorganic5.fdt.net> wrote:
> >On Wed, 28 Jan 1998, Chen Shiyuan wrote:
> >
> >> Hmm... your method is very interesting EXCEPT that if I have over 120
> >> modems, I will end up giving my self one hell of a time.
> >> >
> >> > DEFAULT Auth-Type = System, NAS-Port = 1
> >> > Service-Type = Framed-User,
> >> > Framed-IP-Address = 1.1.1.2,
> >
> >What's the signifigance of 120? Also, if you do this, the PM3 is (AFAIK)
> >going to advertise a host route for each user (assuming you don't use
> >proxyarp). Yucky.
>
> With Cistron Radius, you can just do:
>
> DEFAULT Auth-Type = System
> Service-Type = Framed-User,
> Framed-IP-Address = 1.1.1.1+,
>
> Where the '+' after the Framed-IP-Address will cause the NAS-Port to get
> added to the IP address. In fact we use this instead of the portmasters
> IP pool.
>
> Also, if you only want to do this for some ports, well the NAS-Port check
> item supports ranges:
>
> DEFAULT Auth-Type = System, NAS-IP-Address = 1.2.3.1, NAS-Port = 10-20
> Service-Type = Framed-User,
> Framed-IP-Address = 1.1.1.1+,
> Fall-Through = Yes
>
> (with a small demonstration of the Fall-Through option which makes it
> possible to put DEFAULT or other items at the start or in the middle
> of the users file. The users file is processed top-down).
>
> Mike.
> --
> Miquel van Smoorenburg | The dyslexic, agnostic, insomniac lay in his bed
> miquels@cistron.nl | awake all night wondering if there is a doG
> --
> The From: and Reply-To: addresses are internal mail2news gateway addresses.
> Reply to the list or to miquels@cistron.nl (Miquel van Smoorenburg)
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-users' in the body of the message.
>
====================================================================
___ ___ _ _
/ __)/ __)( \/ ) Chen Shiyuan Tel : 4683955 x 16
( (__ \__ \ \ / csy@hjc.edu.sg Fax : 4674366
\___)(___/ (__) Network Administrator Hwa Chong Junior College
====================================================================
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.